Vivint VS-SWTCHPLT-R01 Quick Reference

PRINT INSTRUCTIONS FOR REFERENCE SHEET FOR: VIVINT SMART LIGHTING —
DOCUMENT P/N: 77-600057-001 REV 1.1 | ISSUE DATE: MAY 2023 |
INK: BLACK | MATERIAL: 20 LB MEAD BOND | SIZE: 8.50" X 11.00" SCALE 1:1 |
FOLDS: BI-FOLD VERTICAL, BI-FOLD HORIZONTAL (TO FIT IN BOX)
Vivint Smart Lighting
(See P/N Part Numbers in the Specifications)
Quick Reference (Overview, Installation, Specs, Regulatory)
Vivint Smart Lighting is a smart home indoor lighting solution that is comprised of three components — smart switches
(mounting bracket and cover plate), bridges, and light bulbs. Smart Lighting can be installed as a standalone solution,
or integrated with an existing Vivint Smart Home system in order to provide remote lighting control via the panel/hub or
the mobile app. Either professionally installed or DIY installed by the homeowner, you simply connect the bridge device
to the local network router, configure groups of lights and install the smart light bulbs, and replace existing light switches
with the corresponding smart switch.
The Vivint Smart Lighting switches can replace both toggle and rocker style light switches; and are compatible with single
(1) gang, double (2) gang, and triple (3) gang switches. See the illustrations below. Setup follows the same general
procedure for all smart switch types; however, please note that this document uses the single-gang toggle smart switch
when describing switch-specific tasks in the installation instructions.
Key features include — Remote control ability to turn the lights on/off and dim 0% to 100%. Lights can be configured
individually or in groups. The LED light on switch plate indicates status, and is used for visual feedback during the pairing
process. Smart switches do not require an electrical connection, and can be added to any room on any wall surface.
This document includes a product description, illustrations, installation instructions, basic operation / user functionality;
as well as technical specifications, standards listings, and regulatory compliance references.
Smart Switch Plates for Both Toggle and Rocker Style Switches (1, 2, 3 Gang) —
Vivint Smart Lighting offers switch plates for both toggle and rocker switch styles, as well as compatibility for 1, 2, and 3 gangs. The switches plates (covers) are the same
for both toggle and rocker switches. The three gang sizes are shown below, as well as a side and bottom view of the single switch.
Installation Instructions —
Installing and setting up the Vivint Smart Lighting solution is a multi-step procedure but it is straightforward and can be quickly learned. Setup is comprised of the
main tasks shown below. The Smart Home Pro or homeowner should carefully read all of these steps in order to ensure a successful installation and optimal
performance. Please note that the switch-specific steps (and images) below describe an installation using the single-gang toggle smart switch. For additional
information, refer to the Field Service Pros website.
MAIN SETUP TASKS OUTLINE
1) Bridge — Connect and pair the bridge to the network/system
2) Group — Select or create a "group" to which you can add smart light bulbs
3) Switch — Install the smart switch to control the group of lights
Task 1: To connect and pair the bridge to the network/system:
1. At the panel, go to Smart Home Devices > Zigbee Devices > Zigbee Bridge.
2. Connect the bridge to the local network router, using the provided Ethernet cable.
3. Power it on by plugging the power supply into a wall outlet and connecting it to the bridge (USB-C).
4. Press the Pair button on the bottom of the bridge.
5. At the panel, select the Pair Bridge button. This may take a few minutes.
6. Once the bridge is paired, you can configure groups to which you add smart light bulbs, and then
set up a smart switch that will control that group of lights. Select the Set Up Lighting button.
Task 2: To select or create a group and add light bulbs:
IMPORTANT: Light bulbs must be added to a "group" even if that group contains only one bulb.
1. At the panel (after tapping Set Up Lighting), select the group to which you want to add the light
bulbs, or enter a name to create a new custom group. Then select Set Up Bulbs.
2. Replace the existing bulbs with supported smart bulbs and power them on.
3. Next, at the panel you can either scan for the bulbs, or you can enter their serial number manually.
This may take a few minutes.
4. When the bulbs are discovered, they are added to the group. Select Save and Continue.
5. Once the bulbs have been added to a group, you can set up the smart switch to control that group.
Select the Add New Vivint Switch button. To configure another groups, repeat the steps above.
4931 N 300 W Provo, UT 84604
Bridge (front view) —
Bridge (bottom view) —