INSTRUCTION FOR USE HUSQVARNA CHARGING HUBS BY WORK SYSTEM TABLE OF CONTENTS Product sheet................2 General user information..........4 Connecting the Charging Hub........6 Maintenance................7 End-user warranty..............8...
HUSQVARNA CHARGING HUB S VAN BY WORK SYSTEM Item number: 927-130-45-56-EU-08 Husqvarna PNC: 970 75 08-01 • Space for up to 8 chargers in the hub • Two (2) power sockets on the outside of the box for the possibility of connecting quick chargers etc.
Page 3
HUSQVARNA CHARGING HUB L FLATBED BY WORK SYSTEM Item number: 927-190-105-64-EU-16 Husqvarna PNC: 970 74 86-01 • Made to be outside on the flatbed of the car • Weatherproof – store your batteries and equipment in a clean and dry environment •...
GENERAL USER INFORMATION HUSQVARNA CHARGING HUB BY WORK SYSTEM Be careful and use the product correctly. This product can cause serious injury or death to the operator or others. Read the operator’s manual carefully and make sure that you understand the instructions before use.
Page 5
WARNING! Install the product according to the accompanying installation instructions. WARNING! If the product does not work when connected to an electrical outlet, immediately disconnect the unit’s power cable and contact your nearest Husqvarna Pro Partner or Work System Pro Partner for troubleshooting.
CAUTION! Always plug the cable into the Charging Hub before plugging the cable into the power outlet. WARNING! In case of the slightest damage to the connection cable, do not use it. To disconnect the Husqvarna Charging Hub (S & L) Van: 1. Disconnect the cable from the electrical outlet.
MAINTENANCE OF HUSQVARNA CHARGING HUB (S & L) VAN ART.NO. 927-130-45-56-EU-08 & 927-130-54-92-EU-16 To ensure the full functionality of the Charging Hub (S & L) Van, it is important to maintain the product frequently. • Avoid leaving drawers open in bad weather such as rain or snow. This is to minimise moisture getting into the hub.
End-User Warranty document, that the battery box product for vehicle integration known as “Husqvarna charging hub by Work System” which has been developed in collaboration with Husqvarna Group AB (publ) (the “Product”) is free from defects in material or workmanship under normal use and maintenance during the applicable Warranty Period (as defined below) (the “Warranty”).
Need help?
Do you have a question about the WORK SYSTEM S VAN and is the answer not in the manual?
Questions and answers