Operating The Mixer; Turbo Boost Function - Breville Wizz BEM200 Series Instructions And Recipes Manual

Electronic mixer
Table of Contents

Advertisement

assembly and operation of your Breville Wizz™
electronic mixer

operating the mixer

1.
Ensure that the speed control dial is set to the
'OFF' position and that the motor head is securely
attached to the mixer stand before using.
2.
Add ingredients to the mixing bowl supplied as
listed in the recipe.
3.
Insert the power cord into a 230/240V power
outlet and switch the power 'ON'. Commence
mixing by turning the speed control dial
clockwise. Always begin mixing at a lower
speed setting to prevent splattering. Increase
to the speed suited to the mixing task. The
speed setting can be adjusted during operation
by turning the dial forwards and back. Use the
mixing guide as a reference, align the speed
setting with the indicator arrow on the mixer, or
between numbered settings.
4.
Occasionally stop the mixer during operation
and scrape any food mixture down the sides of
the mixing bowl with a spatula.
5.
When mixing is complete, turn the speed
control dial to the 'OFF' position. Switch the
appliance off at the power outlet and unplug
the power cord.
6.
Press the 'Tilt Back Locking' button and tilt
motor head back on the mixer stand.
7.
Remove the beaters/dough hooks by pressing
the eject button while grasping the shafts.
The beaters/dough hooks will be released
automatically. DO NOT try to pull the beaters/
dough hooks out of the sockets. Use a spatula to
remove mixture from the beaters/dough hooks.
avoId CoNtaCt WItH BeateRS/dougH HooKS duRINg opeRatIoN. Keep HaNdS, HaIR,
ClotHINg, SpatulaS aNd otHeR uteNSIlS aWay fRom BeateRS/dougH HooKS to pReveNt
INJuRy oR damage to tHe mIxeR.
continued

turbo boost function

Pressing the 'Turbo' button while mixing provides
an extra burst of power, overriding the speed
setting being used. Press the 'Turbo' button and
hold it down for no more than 30 seconds to avoid
overheating.
always turn the Wizz™ electronic mixer 'off'
if you need to scrape the bowl during use. then
continue mixing.
9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents