pero PB09 Instructions

Instruction for PB09 50,000 mAh
PD POWER BANK
EN
Dear customer!
Congratulations on your purchase of the PERO® device. It is recommended that the user read this
manual entirely in order to make full use of the product For more information about PERO products,
please visit our web-site: https://mypero.com
Owner's manual. Power bank (hereinafter referred to as PB)
Specifications
Battery capacity: 50,000 mAh
USB-A Output 1: 4.5V/5A, 5V/3A, 9V/2A, 12V/1.5A
USB-A Output 2,3,4: 5V/2.1A
USB-C Output 5: 5V/3A, 9V/2.2A, 12V/1.6A
USB-C Input 1: 5V/3A, 9V/2A, 12V/1.5A
Micro USB Input 2: 5V/2A, 9V/2A, 12V/1.5A
Fast Charge 3.0
LED charge indicators
1. Package (pic. 1)
1.1 Power bank
1.2 Micro-USB cable
2. LED indicators (pic. 2)
2.1 Battery-power LED indicators will turn on by pressing lightly the power button.
Note: Any power bank will not deliver full-declared capacity to your device — some of this
energy is lost through heat generated and voltage conversion. Please, check the specification
of your phone or tablet's battery to estimate how many full charges you can expect. If not
stated otherwise expect to achieve around 70% of efficiency.
3. Power bank charging (pic. 3)
Connect the compatible USB charger (purchased separately) to the wall outlet/
computer. Connect the micro-USB or Type-c connector to PB charger
connector. The light indicators will turn on and the LED indicator will blink
throughout the battery charging process, indicating its stage.
When the battery is fully charged, firstly disconnect the compatible charger
from the PB, and then remove it from the power outlet. Hold the plug, but not
the cord when disconnecting the charger.
4. USB device charging (pic. 4)
4.1 Connect your device to PB using the cable that comes with the power bank or your mobile
phone/ tablet.
4.2 Press ON/OFF button once.
4.2 The illuminated LED indicator on PB indicates the charging process. As the external
battery is discharged, more indicators will turn off on it. When your device is fully charged, the
battery will turn off.
WARNING
1) Do not disassemble the enclosure. The battery may explode when damaged. It is not
recommended to attempt to repair the device yourself, which will result in the loss of
warranty.
2) The power bank must be stored in location with temperature ranging between 15 to 25 0
C for optimal performance. Too high/low temperature results in the loss of capacity and
shorter lifetime of the battery. A device with an excessively heated or cooled battery may not
work temporarily.
3) Do not dispose of batteries in a fire as they may explode.
Manufacturer: PERO Electronic Technology Co., Ltd.
Address: Room 155-7, Capital Building, 175-191 Lockhart Rd, Wan Chai, Hong Kong.
Importer: Absolut Group North-West LLC. 196210, St. Petersburg, st. Shturmanskaya, 19, lit. B,
room 6-N. http://mypero.com
Disposal: Bring the used electronic products, batteries and packaging to the recycling
collection points.
WARRANTY RESPONSIBILITY
The warranty period starts from the date of purchase of the product from the authorized
Pero distributor. The date of purchase is specified on your sales receipt or delivery note.
Repair, replacement or refunds within the period of warranty are made at the discretion of
Pero. To obtain warranty service the product is to be returned to the distributor at the place
of purchase together with a proof of purchase (sales receipt or delivery note).
Troubleshooting
issue
The power bank does not charge
1. Package Contents
(рiс.1)
2. LED indication
75-100 %
50-75 %
25-50 %
<25 %
(рiс.2)
3. Charging Power Bank
(рiс.3)
4. Charging USB Device
(рiс.4)
SAFETY INSTRUCTIONS
Read and follow all the instructions before using the product:
1 ) Do not expose PB to excessive moisture, water or dust. Do not
install in locations with high moisture or dust.
2) Protect the device from heat: do not install it near heaters and do
not expose it to direct sunlight.
3) The product is to be connected to power supply of the type
specified in the owner's manual only.
4) Clean the device only with dry cloth.
1) Adhere to the sequence of connections when
connecting to the power supply (for charging).
2) Make sure that the power bank contacts fit tightly
with the charger contacts and that they are not dirty.
3) Replace the cable.
%
Type-C
Micro USB
Solution