Table of Contents About this Guide……………………………………………………………………………….1 Batteries………………………………………………………………………………………...2 Statement of User Responsibility…………………………………………………………….3 Contraindications……………………………………………………………………………….4 What Is An Electrode……………………………………………………………………..……5 Care of the Tennant BioModulator®…………………………………………………………6 Can I Do Too Much…………………………………………………………………………….7 Turn On Device………………………………………………………………………………..8 Accessory Port………………………………………………………………………………….9 Modes……………………………………………………………………………………….8-14 Power Settings…………………………………………………………………………….….15 How to Use Power……………………………………………………………………………16 Colored Lights……………………………………………………………………………..17 Voltage Readings………………………………………………………………………..…..18 Voltage Indications……………………………………………………………………………19 Practice Using Device…………………………………………………………………….20-23...
Page 4
Table of Contents Measure BioTerminals……………………………………………………………..……..25-28 Balancing Autonomic Nervous System………………………………………………..29-32 Activating Primary Power Circuit……………………………………………………………33 Electrodes Attached with Wires……………………………………………………………..34 Optional Attachments………………………………………………………………………...35 Charge Muscle Battery Packs…………………………………………………………...36-37 Connecting Black and Red Leads…………………………………………………………..38 Troubleshooting Voltage Readings………………………………………………………….39 Simple Daily Treatment…………….………………………………………………………...40 Warranty………………………………………………………………………………………41 FDA Classification ……………………………………………………………………………42...
• For support with your device, please reach out to the Senergy office at 972-580-0545. Please remember that support does not include medical advice. For educational purposes only...
Batteries • The Tennant BioModulator® operates using 2 AA alkaline batteries, which are included with the device. Please ensure you use new batteries of the same brand for optimal performance. Avoid mixing old and new batteries, as this can lead to leakage.
• You have received your Tennant BioModulator® either as a licensed healthcare professional or with a prescription on file with Senergy Medical Group. • Taking care of and using the device is entirely your responsibility. • The examples shared by other users are meant to inform you and should not replace the guidance of your own physician or any other medical professional.
Contraindications These guidelines apply specifically to the use of the Tennant BioModulator® with the electrode placed directly on the skin. When using the Tennant BioTransducer®, these considerations do not apply. • Please refrain from using it with a pacemaker unless you have the cardiologist's approval.
What is an Electrode • An electrode is a component that transmits current, allowing frequencies from the Tennant BioModulator® to enter the body. • The metal on the back of the device serves as an electrode. • All conductive attachments that connect to the device, such as foot plates, hand grips, Y electrodes, and electrode pads that adhere to the skin, are considered electrodes.
Care of Device Please keep in mind that your Tennant BioModulator® contains software and advanced circuitry similar to a computer, so it's important to handle your device with care.. Please avoid turning it on if the temperature is below • freezing.
Can I do too much? • You can use the device for extended therapy sessions whenever you feel the need. There may be moments when you're experiencing pain from a serious injury, and using it longer can support your healing process. •...
Turn Tennant BioModulator ® On/Off switch is located on the side of your device. To power it on, please slide the switch up, and to turn it off, slide it down. For educational purposes only...
Accessory Port Accessory port located in the top right corner of the unit. Please use this port exclusively for authorized accessories. Forcing anything into this port could void the warranty, so please handle it with care. Remember to unplug the wire when it's not in use.
Page 14
Mode Selection with Tennant BioModulator ® Whenever you The illuminated press the BLUE light MODE button, shows that the the illuminated device is blue light will currently in shift to active mode. indicate the mode you've selected. For educational purposes only...
Page 15
Assess Mode • Assess – “voltmeter” measures the voltage when placed on the skin, allowing you to evaluate specific points on the body. Gently place the metal electrode on the skin you wish to measure and press firmly. A single light will illuminate to indicate whether the voltage is normal, healing, or low.
Page 16
Ten-8 mode ™ • Ten-8™ – A therapy mode designed specifically to provide relief for chronic, persistent pain, as well as for muscle and bone discomfort. The device is portable and can smoothly move over the areas that need attention. Please note that this mode does not measure voltage.
Page 17
Infinity ™ Mode Infinity™ - A treatment mode designed to provide symptomatic relief • from pain and support for organs. This mode is excellent for alternating with Ten-8 when addressing pain over extended periods. The device can move smoothly over the area of concern rather than remaining stationary.
Automatic Mode • Automatic – This mode operates in phases: (1) It first reads your voltage, and then (2) the Infinity™ therapy mode begins automatically, lasting for 1 minute. You will hear a series of beeps when the therapy session concludes. It will then take another reading, allowing you to see if there has been any improvement.
Tennant BioModulator Power Settings ® when in the Ten-8 or Infinity modes ™ ™ Power Setting Indicators Adjusting the Power Levels When in Ten-8 or Infinity ™ ™ Press and hold the UP (+) As you increase the power of button to increase the the unit, the lights on the power.
Setting Power Level • You set the power to what feels comfortable • A slight tingle should be felt • It is better to use too little power (rather than too much). The cells will shut down if you use too much power. This is not harmful but it is counterproductive.) •...
Please be aware that the colored lights signify different meanings depending on whether you are in assessment mode therapy mode. Assessment Modes • If you are in Assess or Automatic modes, the light is indicating a voltage reading. Therapy Modes •...
Voltage Readings in Assess or Automatic Mode Voltage readings can only be taken in Assess or Automatic Use Assess when you want to record your voltage on a chart. When in Assess or Automatic Use Automatic Modes the light when you want to is indicating a measure the voltage reading...
Voltage Indications When in Assess or Automatic Modes 50 + Healing 15 - 24 Low Voltage 35 - 49 5 - 14 Robust Lower Voltage 25 - 34 Normal When in Assess or Automatic Modes the light is indicating a voltage reading not power level.
Put The Device in Ten-8 Mode ™ By Pressing the Mode Button Each time you The illuminated press the BLUE light MODE button, indicates the the illuminated active mode. blue light will move to the selected mode. For educational purposes only...
Page 25
Put The Device On Your Skin And Press The + Button Until You Feel A Slight Tingle • Take your time to gently move the device across your skin to familiarize yourself with the sensation. • Your comfort with the BioModulator®...
Page 26
Making mistakes is perfectly fine; just try not to stress over them too much. • It's understandable that some users may feel anxious about making mistakes. However, if you follow the instructions, there's no need for concern. • The BioModulator® was designed for general use and doesn't require precise application.
Page 27
Practice Using Your Device In Both The Ten-8 Mode ™ And The Infinity Mode ™ • Feel the difference between the two modes. • It is important to understand that there are guidelines for determining which mode may be optimal for different situations. However, there is no harm in experimenting.
Treat Pain As Long As Needed • Both Ten-8 and Infinity modes can be effective in alleviating pain. It may be beneficial to alternate between these modes when addressing chronic pain over extended periods. You can notice the differences in the modes when applied directly to the skin using electrodes such as foot plates, hand grips, the Y electrode, and adhesive electrode pads.
Measuring and Treating BioTerminal Points ® • Measuring the body helps us understand where support is needed. • When taking voltage readings, please place the electrode on your device at each point shown in the image on the next page, ensuring firm contact with the skin. •...
Page 30
Measure Voltage on each BioTerminal Point Brai n, Eyes, Ears - BT -HD Brai n, Eyes, Ears - BT -HD Lung- BT -NK Large Intesti ne - BT -NK Heart- BT -CH Small Intesti ne - BT -CH Spl een- BT -AB Stomach - BT -AB Ki dney - BT -PV Bl adder- BT -PV...
Page 31
Avoid Measuring Voltage When • The skin is hot and sweaty • The skin is very dry • You have not had at least 8oz. of water to drink in the last 30 min. If you take readings under these conditions, they will not be accurate •...
Page 32
Only Measure Voltage Once A Day Skin should be clean and dry, free from makeup or moisturizers. • • When measuring your points, it’s important to place the electrode firmly on that point. • The first reading you receive is the one that matters. •...
Balancing the Autonomic Nervous System It's important to correct imbalances in the body. The effects of balancing the autonomic nervous system can be both visible and subtle, yet they are certainly felt. This treatment is crucial because an imbalanced autonomic nervous system impacts every aspect of your well-being.
Page 34
Balancing the Autonomic Nervous System This is done by using the Tennant BioModulator in the Infinity mode. ® 1. Place the Y electrode on the side of the neck half-way between the shoulder and the ear. (See image on next page.) device should be in Ten-8™ mode to set the power at a comfortable level.
Page 35
This Image Shows Where to Place the electrode for Balancing the Autonomic Nervous System Fixing Your Bowling Ball” “ Spinal Accessory (XI) Nerve For educational purposes only...
Page 36
Balancing the Autonomic Nervous System We want to further explain the bowling ball technique because it is so important. This is a learned technique, and it will take time to get it just right. Balancing the autonomic nervous system is something that will need to be done every day because it is important to keep the autonomic nervous system in balance.
Activating Primary Power Circuit Place the Y electrode at the base of the skull. Treat using the Ten-8 mode for 3 minutes For educational purposes only...
Electrode Pads Attached with Wires The electrode pads are connected by a wire that splits into two parts: one end is red and the other is black, which plugs into the pads. Depending on the wire you choose, you can use either 2 or 4 pads. This is a convenient way to manage pain while you're on the move.
Optional Attachments There is an Accessory Port on the other side of the unit. There are many different attachments that can be plugged into the Tennant BioModulator that make it much easier to treat specific areas of the body. ® •Scalp Electrode •Face Electrode •Pencil Electrode...
Improve Total Body Voltage Charge the Muscle Battery Packs • This is done by using the foot plates and hand grips at the same time. This is recommended for people to do everyday to charge up the whole body. Please charge after you have done the balancing steps of the daily protocol.
Page 41
Foot Plates and Hand Grips Charge up the Muscle Battery Pack For educational purposes only...
Place Black Lead Wherever You See “Black” Place Lead Wherever You See “Red” If you are using the foot plates the right foot uses the red plate and left is black and hand grips hold the red in the left hand and the black in the right hand. This image illustrates the •...
Troubleshooting Voltage Readings • If you can not get a reading; resolve these issues first – Person is dehydrated – drink more water – Reading takes longer to display (may take up to 10 seconds) when voltage is very low –...
An easy way to work on chronic pain or illness is with the Tennant BioTransducer®, simply point the light at any area of concern. • Please call Senergy at 972-580-0545 to order a Tennant BioTransducer® if you don’t have one or visit Senergy.us For educational purposes only...
Two-Year Limited Manufacturer Warranty • The warranty begins on the date of purchase and covers manufacturer defects only. • The warranty becomes invalid upon any of the following: More than two years has passed since the purchase date. The device was damaged or broken due to abuse, misuse or improper use. Dropping it, throwing it, leaving it in extreme heat or cold, etc.
Need help?
Do you have a question about the Tennant BIOMODULATOR PLUS and is the answer not in the manual?
Questions and answers