Related Manuals for Feasycom FSC-DB218
Summary of Contents for Feasycom FSC-DB218
- Page 1 FSC-DB218 User Guide Development Board User Guide Version 1.0 www.feasycom.com Shenzhen Feasycom Co., Ltd...
-
Page 2: Revision History
Copyright © 2013-2024 Shenzhen Feasycom Co., Ltd. All Rights Reserved. Shenzhen Feasycom Co., Ltd reserves the right to make corrections, modifications, and other changes to its products, documentation, and services at any time. Customers are advised to obtain the latest relevant information before placing orders. - Page 3 FSC-DB218 User Guide 1. Introduction Summary The development board is as follows： FSC-DB218 development board integrates Type- C(including UART/USB/ charging/power supply), audio input and output, microphone, lithium battery, buttons, reset buttons, status indicator lights and so on. It can be used in conjunction with our serial...
-
Page 4: Function Description
FSC-DB218 User Guide 2. Function Description 2.1 Layout USB/UART Switch TRBI200 Type-C Module indicator light Adu board indicator light Audio Module Input Module Power Microphone IPEX Block （Empty by default） Headphone Output Adu board reset Volume Power Battery Volume reduction... - Page 5 FSC-DB218 User Guide Adu board reset key Reset the extended Adu board. Lithium battery interface. 3.7V~4.2V 。 This voltage cannot be exceeded, Battery Powered otherwisethe module will be damaged. Volume Plus Short press volume increase/long press next song. Volume reduction...
- Page 6 FSC-DB218 User Guide 3. Driver Installation and Serial Assistant 3.1 Win7 need to install a serial driver（Win10/11 may no need） ，which can be viewed in the computer device manager（You can install a serial port tool by a third party and plug in USB to identify it.
- Page 7 Transfer rate 4,Check this option Use WeChat to scan to enter the WeChat public account of Shenzhen Feasycom Co., Ltd. and follow the company's latest developments! www.feasycom.com Shenzhen Feasycom Co., Ltd...
- Page 8 FSC-DB218 User Guide The shortcut keys in the right frame can be used to query the basic information of the module: if you query the device name, the query results will be displayed in the shortcut box and also in the feedback interface.
Need help?
Do you have a question about the FSC-DB218 and is the answer not in the manual?
Questions and answers