Getting Connected; Gprs/3G; Wi-Fi - Huawei Comet User Manual

T-mobile comet: user guide
Table of Contents

Advertisement

Getting Connected

GPRS/3G

Your mobile phone will be automatically configured to use your wireless service provider's GPRS/3G/
EDGE service (if available) when you turn on the phone for the first time. Note that the SIM card must
be inserted.
Checking the Network Connection
1. Touch
> Settings.
2. Touch
Wireless & networks
3. Touch
Network operators
Note: Your mobile phone will automatically read the access point of the SIM card. For this reason, do not
change the parameters of the access point; otherwise, you might not be able to access network
sources.
Turning on the Data Service
1. Touch
> Settings.
2. Touch
Wireless & networks
3. Select the
Data enabled
Tip:
If you do not need a wireless network, you can uncheck the Data enabled check box to save data traffic
costs.

Wi-Fi

Wi-Fi gives you wireless access to broadband Internet access. To use Wi-Fi on your mobile phone, you
need to have an access to wireless access points (hotspots). Obstacles that block the Wi-Fi signal will
reduce its strength.
>
Mobile
networks.
or
Access Point Names
>
Mobile
networks.
check box to turn on the data connection.
to check the network connection.
32

Advertisement

Table of Contents
loading

Table of Contents