Advertisement
Quick Links
Advertisement
Summary of Contents for Elcold SC12CL
- Page 1 USER INSTRUCTIONS COMMERCIAL FREEZERS & COOLERS UL udg.03...
-
Page 2: Temperature Adjustment
Operating instructions Starting Up. Commercial Freezer/Cooler. In case the compressor does not start when the freezer/cooler has been plugged in, the electrical In order to get the max. advantage from your supply may not be in order. Check if there is an freezer/cooler it is important that it is placed in the electricity supply to the plug or if the fuse is blown. - Page 3 Please note: After the lid has been opened, there will be a vacuum created inside the freezer due to the low Cleaning of sliding tracks. temperatures. Wait a few minutes before trying to re- The dust from the sliding track is easily removed open the lid otherwise the handle could be damaged.
- Page 4 Dixell controller. Enter the programming mode by pressing the SET and arrow down keys for 3 seconds. Before useBefore use Select the parameter “Ot” by pressing arrow up or down key. Press the SET key to display its value. Use arrow up or down to change its value. The offset can be adjusted to +/- 12 dgr .C Functions.
-
Page 5: Troubleshooting
Trouble shooting N.B. There will be no compensation for incorrect use. If the freezer has stopped working, please check Service. the following before calling for service: Has the freezer been switched of at the mains? Before calling a service engineer, please check: Is the fuse blown? Not freezing/cooling.
Need help?
Do you have a question about the SC12CL and is the answer not in the manual?
Questions and answers