Related Manuals for DW SiteWatch DW-SWSPC30iAM
Summary of Contents for DW SiteWatch DW-SWSPC30iAM
- Page 1 SiteWatch In-Ceiling IP Speaker DW-SWSPC30iAM User’s Manual Ver. 04/25 Before installing and using the camera, please read this manual carefully. Be sure to keep it handy for future reference.
-
Page 2: Table Of Contents
User Manual Table of Content Overview ................. 3 What's in the box ............3 Hardware Installation ..........4 Adding the Speaker to DW Spectrum ....5 Web Configuration ............5 Status ..............................6 Basic ..............................8 5.2.1 Network .............................. 8 5.2.2... -
Page 3: Overview
They enable flexible paging and audio solutions supporting up to 10 RTP multicast addresses. Integrated alarm inputs and HTTP URL capabilities allow seamless connection with alarm systems. Fully compatible with DW Spectrum IPVMS, IP cameras, and third-party access control, analytics, and VoIP systems (SIP-supported), these speakers support pre-recorded messages and scheduled broadcasts to meet diverse paging needs. -
Page 4: Hardware Installation
User Manual Hardware Installation Use the provided mounting template to trace the cut area with a pencil, and mark and drill the hole on the mounting surface. 2. Pass wires through and make all the necessary connections. Connect to the camera's network. -
Page 5: Adding The Speaker To Dw Spectrum
Open the DW Spectrum client. 2. DW-SWSPC30iAM should be listed under the resource tree if auto-discovery is enabled and the DW Spectrum media server and the speaker are on the same network. *If auto-discovery is disabled, add the speaker manually. Refer to the DW Spectrum user manual for more information. -
Page 6: Status
User Manual After logging in to the speaker, users will be prompted to update the password. The password must meet the following minimum requirements: at least 8 characters, a combination of uppercase and lowercase letters, and special characters. 5.1 Status Status In the menu, the firmware version, free space, and status for the two SIP... - Page 7 DW-SWSPC30iAM IP Speaker...
-
Page 8: Basic
User Manual 5.2 Basic 5.2.1 Network Network In the menu, select the preferred network configuration settings for the IP speaker. Whenever the IP address is updated, users must enter the new IP address when accessing through a browser. • DHCP: When selected, the server automatically updates the speaker's IP address as assigned by the connected DHCP network device (router, smart switch, etc.). -
Page 9: Date/Time
DW-SWSPC30iAM IP Speaker • HTTP/HTTPS: Select the preferred transfer protocol to communicate directly with the speaker using a web browser. • HTTP Port: Select the port value for the Hypertext Transfer Protocol communication (default: 80). • HTTPS Port: Select the communication port value for the Hypertext Transfer Protocol Secure communication (default: 443). - Page 10 User Manual...
-
Page 11: Sip Account
DW-SWSPC30iAM IP Speaker 5.3 SIP Account The speaker has two SIP (Session Initiation Protocol) accounts that can be set up separately for initiating, maintaining and terminating communication sessions. To configure, select the SIP 'Account' from the drop-down at the top of the Account menu and configure the settings below. - Page 12 User Manual • Auto Answer – Set the answer mode. Select from 'Answer Immediately' or 'Answer with Delay.' When 'Answer with Delay is selected, enter the delay time in seconds. • Incoming Notify – Enable sending HTTP commands/requests when an incoming call occurs.
-
Page 13: Audio
DW-SWSPC30iAM IP Speaker 5.4 Audio Users can adjust the speaker audio volume and preferred audio settings as needed. Codec In the menu, users can enable the preferred audio codecs that can be used with the speaker by checking the appropriate boxes. -
Page 14: Media File
User Manual 5.5 Media File There are five (5) default system audio files. These files cannot be altered. Users can upload up to ten (10) custom media files (MP3 or WAV). Not to exceed the available storage, such as music, announcements, bells, etc., for additional audio-out options. -
Page 15: Alarm
DW-SWSPC30iAM IP Speaker 5.6 Alarm The Alarm In function provides a means to integrate external systems with the speaker for enhanced security and alert functionality. Users can select which sound to play in the "Play File" drop-down menu. Users can also choose to cycle the sound with the following modes: Once only,... -
Page 16: Http Commands
User Manual 5.7 HTTP Commands Users can control the sound using an HTTP command from a web browser, VMS, cameras or network device to send commands to the speaker. To use an HTTP command: Open a browser or VMS on your computer. 2. -
Page 17: Schedule
DW-SWSPC30iAM IP Speaker 5.8 Schedule Users can schedule regular bell rings, announcements, and alarms in public areas such as schools, factories, and office spaces. To add a schedule: Click on the Edit icon to edit or add a new audio schedule. -
Page 18: Rtp Multicast
User Manual 5.9 RTP Multicast Each device can receive up to ten (10) RTP IP addresses. Do not use continuous port numbers, which can cause issues and conflicts. For example: 239.255.1.2:8000，239.255.0.1:8001，239.255.0.1:8002（Don’t Use） 239.255.0.1:8000，239.255.0.1:8002，239.255.0.1:8004 (OK) • Multicast address range: 224.0.0.0-239.255.255. • Ports range: 1024-65536 5.10 Firewall Firewall... - Page 19 DW-SWSPC30iAM IP Speaker...
-
Page 20: System
User Manual 5.11 System 5.11.1 Upgrade System In the Upgrade selection of the Menu • Reboot: Click to power cycle the speaker device. Users must log back into the system once the reboot has been completed. • Reset: Click to complete a system default and return the speaker to factory settings. -
Page 21: Administrator Password Reset
DW-SWSPC30iAM IP Speaker 5.12 Administrator Password Reset The administrator password can be reset using the device's MAC address or serial number. To reset the password, access the following URL using the speaker's IP address http://{Speaker's IP Address}/pwreset.html Ex: http://192.168.1.50/pwreset.html... -
Page 22: Ip Finder
User Manual IP Finder If users have difficulty accessing the speaker's web interface, users can use DW's IP finder. DW IP Finder is a software tool developed by Digital Watchdog that helps users locate and manage Digital Watchdog IP devices on a network. It can automatically scan the network for DW Sitewatch IP speakers. -
Page 23: Product Specifications
DW-SWSPC30iAM IP Speaker Product Specifications Audio Codec OPUS 48 kHz, MP3 44.1 kHz, G.722 ADPCM 16 kHz, G.711 PCMU 8 kHz, G.711 PCMA 8 kHz Built-in MIC Speaker Max SPL 96dB Frequency response 100Hz ~ 18KHz Frequency range 500-2KHZ, +-10dB, 400-12KHZ, +-20dB Harmonic distortion 0.1@1kHz... -
Page 24: Product Dimensions
User Manual Product Dimensions... -
Page 25: Warranty Information
DW-SWSPC30iAM IP Speaker Warranty Information https:/ /digital-watchdog.com/page/rma-landing-page/ Go to to learn more about Digital Watchdog's warranty and RMA. To obtain warranty or out-of-warranty service, please contact a technical support representative at 1+ (866) 446-3595, Monday through Friday from 9:00 AM to 8:00 PM EST. -
Page 26: Limits And Exclusions
User Manual Limits and Exclusions There are no express warranties except as listed above. The Warrantor will not be liable for incidental or consequential damages (including, without limitation, damage to recording media) resulting from using these products or arising out of any breach of the warranty. - Page 27 DW® East Coast office and warehouse: 5436 W Crenshaw St, Tampa, FL USA 33634 DW® West Coast office and warehouse: 16220 Bloomfield Ave, Cerritos, CA USA 90703 PH: 866-446-3595 | FAX: 813-888-9262 www.Digital-Watchdog.com technicalsupport@digital-watchdog.com Technical Support PH: USA & Canada 1+ 866-446-3595...
Need help?
Do you have a question about the SiteWatch DW-SWSPC30iAM and is the answer not in the manual?
Questions and answers