Subscribe to Our Youtube Channel
Related Manuals for Elkay Liv EZ
Summary of Contents for Elkay Liv EZ
- Page 1 Liv EZ Built-in Filtered Water Dispenser Non-Refrigerated Installation & Ownership Manual...
- Page 3 Congratulations on Your New Liv EZ Built-in Filtered Water Dispenser! Let’s get it set up so you can start drinking cleaner, safer water in no time.
-
Page 4: Table Of Contents
Table of Contents General Information About the Manual Models Covered in Manual Serial Number Location Contact Information Disclaimer Notice of Changes Safety General Safety Safety Alert Symbol Personal Safety Property Damage Preparing to Install Get to Know Your Liv Components Key Features What’s in the Box Easy Installation... - Page 5 What to Expect From Elkay ® This isn’t our first rodeo — in fact, your new Liv EZ water dispenser is based on Elkay’s award-winning bottle filling station you’ve seen in schools, airports and other public spaces. Now enjoy the same powerful water filtration for safer, better-tasting water right at home.
-
Page 6: General Information
Carefully read, understand and follow all instructions in this manual before starting installation, and familiarize yourself with all components of your Liv EZ. The installation of this product requires connection to a cold water line. If you are unsure or not qualified to make these connections, consult a qualified plumber or Elkay Installation Services. -
Page 7: Disclaimer
• All installation and service work must be performed by for people with the technical knowledge to install, use and authorized service personnel maintain this product at their own discretion and risk. Elkay Personal Protection assumes no responsibility for results obtained or damage incurred from the use of this material either in whole or in part by the buyer. -
Page 8: Property Damage
Preparing to Install WARNING For correct and safe installation, please read these Prior to installation, test for live circuits or wiring instructions completely. inside the wall before cutting or drilling into the wall. Before working near any electrical circuit or DANGER wiring, disconnect power and use a circuit tester Disconnect electrical supply serving the installation area to... -
Page 9: Get To Know Your Liv
Get to Know Your Liv Components: 1. Dispensing Spout 2. Bottles Saved Green Ticker™ 3. Filter Replacement Light 4. 12″-High Stainless Steel Alcove 5. Mechanical Push Button 6. Drip Tray 7. Removable Glass Front Panel 8. Phillips head screws Components: 1. -
Page 10: Key Features
Panel is easy to remove to of disposable, single-use plastic batteries that last up a sleek aesthetic reveal filter and batteries bottles saved to a year What’s in the Box (1) Liv EZ water dispenser (1) Elkay WaterSentry (4) Phillips Head Screws ® 71300C filter... -
Page 11: Easy Installation
Easy Installation Tools You’ll Need Safety Glasses Protective Gloves Phillips Head Screwdriver Tape Measure Wall Cutting Tool Level Various Plumber’s Hand Tools (4) Screws for Wall Quarter-Turn Shutoff Installation (Not Included) Valve for Main Water Supply (Not Included) -
Page 12: Critical Depth Check And Mounting Dimensions
Note: Always consult local plumbing codes prior to installation. Installation Recommended Dimensions Preinstallation: Elkay recommends installing a shutoff valve at the source of the water supply for the water dispenser. 1. Cut an opening into the wall using the recommended mounting dimensions as a guide: 19-1/2″H x 14-1/2″W;... - Page 13 The unit is the filter’s inlet. designed with 1/4″ overlap to conceal any irregularities at the top of the wall opening. Follow startup instructions on the next page to start enjoying your new Liv EZ water dispenser.
-
Page 14: Startup
Startup 3. If there are no leaks and the unit functions properly, attach the water dispenser glass front cover using the Phillips Prepare for First Use Head screwdriver and (4) included Phillips head screws. 1. Open the shutoff valves in the water dispenser and at the water supply. -
Page 15: Filter Status Light
Replacing the Filter 5. If there are no leaks, your Liv EZ is ready to be used — enjoy! 1. Remove the screws from the top and bottom of the front panel. Filter Status Light 2. Rotate the door gently to loosen it and pull it toward you The red LED filter status indicator will illuminate during to remove. - Page 16 3. Turn off the water supply. 5. Install the new filter by inserting it into the filter head and turning it clockwise to lock in place. TURN OFF SHUT-OFF VALVE WATER LINE 4. Rotate the filter counterclockwise to release it. 6.
-
Page 17: Reset Filter Status Light And Battery Replacement
1. Press and hold the button: HLD 3SEC will appear on the LCD screen. 2. After pressing the button for three seconds, FLTR RST will appear on the screen. 3. Replace batteries and filter once a year. Scan the QR code or visit elkay.com/products/details/71300C to order replacement filters. - Page 18 Part Label Description Number 2000002268 Kit - Drain Tray 2000002267 Kit - Replacement Glass - Black 2000002272 Kit - Replacement Glass - White 2000002271 Kit - Replacement Glass - SS 2000002270 Kit - Control Board 2000002269 Kit - Filter Head and Screws 70793C Elbow 1/4 O.D.
-
Page 19: Replacement Parts
Blocked or damaged Locate affected line water line and remove blockage or damage Troubleshooting For installation help, scan the QR code or visit youtu.be/_sKmSkYLj3Q to watch our installation video. Find frequently asked questions at elkay.com/liv... - Page 20 1333 Butterfield Road, Suite 200 | Downers Grove, IL 60515 630.574.8484 | elkay.com | ©2025 EMC Water LLC (4/25) 340-355...
Need help?
Do you have a question about the Liv EZ and is the answer not in the manual?
Questions and answers