Sony Ericsson G700 User Manual page 26

To enter the word
multitap
1 Switch to handwriting recognition
mode.
2 Select English as the input language.
3 Enter letter "l" by pressing
three times.
4 Enter letter "a" by pressing
once.
5 Enter letter "r" by pressing
three times.
6 Enter letter "g" by pressing
once.
7 Enter letter "e" by pressing
twice.
You cannot use multitap under keypad
prediction mode.
To switch between Chinese input
methods
Select Chinese as the input language.
1
2 Press .
信息
To enter
"
1 Select Chinese as the input language.
2 Select Pinyin as the input method.
3 Enter "xin" by pressing
,
24 Getting to know the phone
This is the Internet version of the user's guide. © Print only for private use.
large using
" "
using Pinyin input
"
,
.
4 Select "xin" using the navigation key,
and then select "
candidate list.
5 Enter "xi" by pressing
.
6 Select "xi" using the navigation key,
and then select " 息 " from the
candidate list.
信息
To enter
"
1 Select Chinese as the input language.
2 Select Stroke as the input method.
3 Enter " ", " " and " " by pressing
,
Use the navigation key to select " 信 ".
4
Enter " ", " " and "
5
,
Select " 息 " from the candiate list.
6
互
To enter using the wild card key
" "
1 Select Chinese as the input language.
2 Select Stroke as the input method.
If you only know that " 一 " is the first
3
and the last stroke of the character "互
" and that the total number of strokes
is four, enter
,
Select " 互 " from the candidate list.
4
信
" from the
,
using Stroke input
"
, .
" by pressing
, .
, ,
.