6. Installation Please check that the stove that you have chosen fits the cabin of your sauna. Note in particular the table on the next page. Ensure that the necessary minimum safety distances as well as the size of the sauna and ventilation cross-sections are strictly adhered to.
Page 13
5 x 2.5 mm² 5 x 2.5 mm² 5 x 2.5 mm² 5 x 2.5 mm² 5 x 2.5 mm² 5 x 4.0 mm² 5 x 2.5 mm² 5 x 4.0 mm² 5 x 2.5 mm² 5 x 6.0 mm² 400 x 50 mm 410 x 55 mm 420 x 60 mm...
Page 15
• • • Incorrect electrical connections can cause electric shock or fire. The table must be SIHF type or equivalent. The use of PVC insulated cable is prohibited because of thermal brittleness. It must be ensured that the sauna stove is correctly earthed. The earth connection should have a wider diameter than the power supply.
Page 16
When starting up for the first time, an odour may be released due to evaporation from the previously unused materials. Ensure thorough ventilation when heating for the first time.
Page 17
Connect the power cable to the sauna stove before loading the sauna stones.
Please note that stove safety guards must end 25 mm below the upper edge of the sauna stove. Under no circumstances must they come into contact with the radiant heat of the sauna stones. 7. Adding water...
10. Unit plate The unit plate lists the type-specific technical specifications. The unit plate can be found on the lower left side of the unit. 11. Sales and contact Warranty •...
Need help?
Do you have a question about the ARNE and is the answer not in the manual?
Questions and answers