Advertisement
Quick Links
Advertisement
Summary of Contents for Rocky Mountain MT21
- Page 1 MT21 Installation Instructions...
-
Page 2: Installation Instructions
The MT21 can be installed as a one day project. The normal time required to install the MT21 is about 3-5 hours for a two man crew. This time requirement will vary depending upon the composition of the soil and the speed of the installers. - Page 4 Assembly Top Rail Assembly a. Slide the undrilled end of the 11’6” top rail as far as it will go into the sleeve of the triple end. b. Insert and tighten 4 of the ⅜” x ⅜” set screws into the triple end sleeve to secure the top rail in place.
- Page 5 Lay the top rail assembly on the ground in the area where you want to install the swing set. Using the diagram below, determine where the vertical ladder will go and mark the ground for the ladder hole. Move the top rail assembly and dig the hole. Lay the ladder on the ground with the bottom of the ladder laying just over the hole you just dug.
- Page 6 Turn the top rail on its side and slide the top rail into the sleeve at the top of the ladder and position it according to the diagram above. Loosely install two ⅜” x ⅜” set screws into the top of the ladder sleeve. Insert the two A-frame legs (1 ⅞”...
- Page 7 With the ladder still standing in its hole, situate the A-frame end to the desired position in the play area. Mark the ground where the A-frame leg holes will be. Move the legs out of the way and dig the holes. Place the legs into the holes.
- Page 8 Secure swing hangers to the top rail at the following locations: Swing Hanger Assembly 1. Loosen and remove the two nyloc jam nuts. 2. Reassemble the swing hanger onto the top rail. Tighten securely so that the hanger is firmly attached in place and cannot slide or swivel along the top rail.
- Page 9 Cementing In the Swing Set When you are satisfied that the structure is level, mix and pour the concrete according to the package directions. You will use approximately 6 to 7 80lb. bags in the ladder hole and 1 ½ 80lb bags in each a-frame leg hole. Concrete will cure faster in warm conditions and slower in cold conditions.
-
Page 10: Read Before Use
Do not attempt to use equipment for something other than the use for which it was designed and intended, or in a manner other than that for which it was designed and intended. While every attempt is made by Rocky Mountain Swing Sets to ensure the highest degree of safety in all of our equipment, we cannot guarantee freedom from injury. - Page 11 Maintenance of Your Playground We hope that you and your family will enjoy many hours of great family fun while using your Rocky Mountain Swing Set product. We appreciate your business. Our goal is to provide safe, durable and fun products using the best materials available.
- Page 12 To Help Prevent Injuries from Falls & Other Hazards 1. Never attach, or allow children to attach the following items to your swing set: Ropes, jump ropes, clotheslines, pet leashes or any similar type of item to your swing set. Any item such as these may present a strangulation hazard.
- Page 13 Residential Products Limited Lifetime Warranty Rocky Mountain Swing Sets works to build heavy duty products that will stand up to the heavy use of active children. You can trust Rocky Mountain Swing Sets because of the way we design and build our products. We make products that are simple to own, and easy to maintain.
Need help?
Do you have a question about the MT21 and is the answer not in the manual?
Questions and answers