Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for GPS Adapter-X
- Page 1 Installation instruction https://gpsadapter.us 14/Dec/2024 V2.9 ::Before ::After...
- Page 2 STMV1 (Page4-8) Adapter-X Without heating support (Page4-14) Multifunction,Heating,Mode Switch all works together with Adapter-X Adapter in steering wheel works mechanism STMV1-H (Page4-12) With heating support Include modified heat switch STMV1-971 (Page4-12) Support 971 style steering wheel Include 95B.971.388.B wire harness...
- Page 3 Adapter in steering wheel Connection diagram(STMV1) works mechanism Connection diagram of STMV1 adapter without heating support Adapter convert LIN BUS protocol and buttons backlight signal, heating function to fit original steering wheel control module. Page 2...
- Page 4 Remove airbag (2) Remove connector (4) Remove connector 2.1 Remove airbag connector, orange 4.1 Remove clock spring connector(2) Remove steering wheel plastic tabs(1) need to be popped up first. and heating connector(1) Tools: 1# T25 Torx M12 2# Slotted screwdriver 3# M12 XZN/Triple Square bits socket 4#Torque Wrench (1) Remove airbag...
-
Page 5: Install Adapter
Install adapter (2) Remove mounting plate (4) Remove connector lock 2.1 Remove airbag mounting plate. Tools: 1# 1.5mm Slotted screwdriver 2# T20 Torx 3# M12 XZN (1) Remove mounting plate (3) Connector pinout (5) Reassemble the plug 1.1 Unscrew airbag mounting plate 3 3.1 Clock spring connector pinout. - Page 6 (6) Reassemble the plug (8) Adapter connect instruction 6.1 Insert wire harness PIN to #11&12 8.1 Remove original #3 connector, connect it to #2 socket source from adapter. 8.2 Connect #3 plug from adapter to original steering wheel electronic box. 8.3 Connect #1 (7) Routing black&white wire 7.1 Routing black&white wire.
- Page 7 (9)Adapter fixed position 9.1 Insert adapter to the gap of electronic box top side, fixed it. (12)Adapter fixed 12.1 Cover adapter and connector with tape. (11)Fixed steering wheel and airbag 11.1 Reassemble airbag holding plate, remember pull 2 shift all 4 paddles plug out of airbag holding plate, reconnect connectors(A B C D) after fixed backplate.
- Page 8 Install adapter with heating support(STMV1-H) (13)Remove back cover 13.1 Remove new wheel back cover STMV1-H support steering wheel heating, this adapter have an extra socket to connect heating temperature and switch plug. Heat switch in new steering wheel need replaced to new one(Steps 11-15),new heat switch ship with heating support adapter kits.
- Page 9 (15)Remove heat switch (17)Replace heat control switch 15.1 Remove heat switch cover 17.1 Replace to new heat control switch shipped with adapter kits. Old heat switch (16)Remove heat switch 16.1 Remove heat switch from cover New heat switch Page 8...
- Page 10 (19)Reassemble heat switch (18)Adapter heat support socket connection guide cover Remove original heating support plug(4 PINs) form top side electronic box in steering 17.1 Reassemble heat switch cover wheel, connect this plug to 4 PINs socket of heating support adapter. Adapter insert sitting the top of electronics box in steering wheel like this photo,Insert top side of adapter into gap first.
- Page 11 (21)Cover adapter with tape How to remove new airbag 19.1 Cover adapter and connector with tape, it’s supplied with adapter kits. Insert T25 torx to one side hole until you can feel the spring, and then gently pull the torx side airbag unit outward, other side same process.
- Page 12 Adapter-X works mechanism diagram Adapter-X • Multifunction and heating support • MODE SWITCH support Carrera 991.1(2012-2016) Cayman 981C(2014-2016) Boxster 981(2012-2016) Cayenne 92A(2011-2015) Page 11...
- Page 13 Adapter-X Mode Switch operation Adapter-X adapters, support turn the Mode Switch to change drive mode(O S S+ I). Press center response button activate 20 seconds Sport Plus mode,S+ LED will keep flashing. Within 20 seconds press again to cancel. The last mode memory function: ...
- Page 14 Install Adapter-X center console module 991.1/ Remove buttons module from center console,series connect Adapter-B to button module and fixed. Page 13...
- Page 15 Install Adapter-X center console module for 958.1 Cayenne Remove control buttons module from center console, series connect Adapter-B to buttons module and fixed. Page 14...
Need help?
Do you have a question about the Adapter-X and is the answer not in the manual?
Questions and answers