Page 1
DESK ELECTRIC ELLIPTICAL TRAINER USER MANUAL IMPORTANT : READ CAREFULLY BEFORE USING FOR THE FIRST TIME KEEP ALL SAFETY INFORMATION AND INSTRUCTIONS FOR FUTURE REFERENCE AND PASS THEM TO SUBSEQUENT USERS OF THE PRODUCT...
Page 2
ANCHEER WARNING AND SAFETY CAUTIONS: Thank you for the purchase of your Ancheer desk elliptical, This manual is part of this product. This document is intended for the end-user of the product. Please familiarize yourself with all the information included before using the product.
Page 3
ANCHEER OVERVIEW: There is no need to assemble when you open the packing,The Ancheer desk elliptical is ready to use without any installation required. Control Panel Pedal CARRING ANCHEER To move the machine ,just take the hole carefully. please donot take the pedal to move it .it will cause demage to the machine .
ANCHEER CONTROL PANEL FUNCTION FUNCTION BUTTON: Press it to select the mode you prefer,Manual mode or Automatic mode Manual mode:HA Auto mode:P1 Auto mode: P2 Auto mode: P3 POWER BUTTON: Press it to turn on or turn off the machine...
ANCHEER REMOTE CONTROLLER Operation keep same as control panel *NOTE:AAA 1.5V X 2 battery need to be self-provided...
Page 6
ONLY USE WHILE SITTING .DO NOT STAND ON THE MACHINE This Ancheer desk elliptical is a two-in-one compact ergonomic item which can plug into the power to assist the workout (Exercise Passively )or can be used directly without power(Exercise Initiatively) The machine automatically shuts off after 30 minutes rating working time.
Page 7
4. Press the “POWER”again to start your exercise AUTO EXERCISE MODE(P) When Press“Function”button until P1 shows,the Ancheer desk elliptical will work at AUTO Mode The machine will work at the programmed speed and direction on different Auto Model. Direction and speed can not be changed in the AUTO mode.
2.Keep it in a dry place Care and Maintenance 1.It is recommended that lubricate oil put on the moving parts(wheels and slide rail ) monthly 2.Keep Ancheer desk elliptical clean with a cloth after use each time MADE IN CHINA...
: FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Need help?
Do you have a question about the TD001S-18 and is the answer not in the manual?
Questions and answers