Related Manuals for CAVIDYNE CaviBlaster 1725-G
Summary of Contents for CAVIDYNE CaviBlaster 1725-G
- Page 1 CaviBlaster 1725-G Operation & Maintenance Manual sales@cavidyne.com | +1 (941) 413-5431 | cavidyne.com | 1747 Independence Blvd. Ste. E1, Sarasota, FL 34234 | Year 2025...
- Page 2 #6) and engine (yellow cap on head cover) (Figure #5) per manufacturers’ operating manuals. Pressure Pump Oil (SAE 30W-Non-Detergent), Kohler Engine Oil (SAE 10W 30). Figure #4 Figure #5 Figure #6 sales@cavidyne.com | +1 (941) 413-5431 | cavidyne.com | 1747 Independence Blvd. Ste. E1, Sarasota, FL 34234 | Year 2025...
- Page 3 Ensure that the feed hose is connected to the pressure pump and the water is on prior to starting the pressure pump. sales@cavidyne.com | +1 (941) 413-5431 | cavidyne.com | 1747 Independence Blvd. Ste. E1, Sarasota, FL 34234 | Year 2025...
- Page 4 Figure #9 Figure #10 sales@cavidyne.com | +1 (941) 413-5431 | cavidyne.com | 1747 Independence Blvd. Ste. E1, Sarasota, FL 34234 | Year 2025...
- Page 5 7. Connect the dual ¼″ black rubber fuel lines from the external fuel tank to the fuel lines attached to the fuel filter and engine. This connection is made with a quick connect fitting (Figure #12). sales@cavidyne.com | +1 (941) 413-5431 | cavidyne.com | 1747 Independence Blvd. Ste. E1, Sarasota, FL 34234 | Year 2025...
- Page 6 When the engine starts, release the key, allowing it to return to the “ON” position and open the choke if it is closed. sales@cavidyne.com | +1 (941) 413-5431 | cavidyne.com | 1747 Independence Blvd. Ste. E1, Sarasota, FL 34234 | Year 2025...
- Page 7 Figure #16 Figure #17 Figure #18 The system is now ready to operate (refer to photo on cover for overall system set-up). sales@cavidyne.com | +1 (941) 413-5431 | cavidyne.com | 1747 Independence Blvd. Ste. E1, Sarasota, FL 34234 | Year 2025...
- Page 8 “ON” position while under water. Revert to step 1 of the operating instructions when the diver or replacement is ready to continue cleaning. Figure #19 – Gun Position for Best Results sales@cavidyne.com | +1 (941) 413-5431 | cavidyne.com | 1747 Independence Blvd. Ste. E1, Sarasota, FL 34234 | Year 2025...
- Page 9 7. Ensure that the gun is submerged any time the engine and pressure pump are operating. sales@cavidyne.com | +1 (941) 413-5431 | cavidyne.com | 1747 Independence Blvd. Ste. E1, Sarasota, FL 34234 | Year 2025...
- Page 10 (less than ¼ gallon per minute) coming out of the bypass with the gun trigger in the open or “ON” position. Figure #20 sales@cavidyne.com | +1 (941) 413-5431 | cavidyne.com | 1747 Independence Blvd. Ste. E1, Sarasota, FL 34234 | Year 2025...
- Page 11 Use single weight lubricating oil (SAE 30 weight non-detergent) 8. Change the spring for the gun trigger every 12 months or less if required. sales@cavidyne.com | +1 (941) 413-5431 | cavidyne.com | 1747 Independence Blvd. Ste. E1, Sarasota, FL 34234 | Year 2025...
- Page 12 12. Flush the system and rinse the outside of the power unit with fresh water. NEVER TURN OFF FEED PUMP WHILE WORKING sales@cavidyne.com | +1 (941) 413-5431 | cavidyne.com | 1747 Independence Blvd. Ste. E1, Sarasota, FL 34234 | Year 2025...
- Page 13 CaviDyne, LLC at +1 (941) 413-5431 | sales@cavidyne.com with any questions. CAUTION: DO NOT USE IT TO CLEAN SENSITIVE SURFACES AS LED LIGHTS, UNDERWATER LIGHTS, ELECTRONIC EQUIPMENT, ETC. sales@cavidyne.com | +1 (941) 413-5431 | cavidyne.com | 1747 Independence Blvd. Ste. E1, Sarasota, FL 34234 | Year 2025...
- Page 14 Components: By-Pass Hose High Pressure Hose Water Inlet Pump-Hose Zero Thrust (Z/T) Gun Gasoline Tank sales@cavidyne.com | +1 (941) 413-5431 | cavidyne.com | 1747 Independence Blvd. Ste. E1, Sarasota, FL 34234 | Year 2025...
Need help?
Do you have a question about the CaviBlaster 1725-G and is the answer not in the manual?
Questions and answers