Hasbro BBA Beyblade Dranzer GT B-27 User Manual

HIGH PERFORMANCE TOPS
Batteries included. Replace with 4 x 1.5V "A-76'
J J -. .or LR44 size button cell batteries. Alkaline batteries
recommended. Phillips/cross head screwdriver needed (not included) to replace batteries.
_[ncludes BEYBLADE top, launcher, ripcord, and Bit Chip.
A WARNING: Do not use BEYBLADE tops or BEYSTADIUM™
on tables or other elevated surfaces.
BEYBLADE tops/BEYSTADIUM are intended to be used on the floor. Do not lean over the stadium
when BEYBLADE tops are in play. BEYBLADE tops may bounce up and hit eye or face.
Before assembly and playing, please
read instructions. Please keep these
instructions for future reference.
When removing parts from runner frame,
ask an adult to help you trim off any
excess plastic using scissors or other
suitable tool.
The frame is numbered. Please follow the
numbers carefully and make sure you are
assembling the right parts.
Discard plastic bags immediately.
PARTS:
BEYBLADE
DRANZER GT
top, Right
Spin launcher,
ripcord, Bit Chip
BEYSTADIUM sold separately.
Insert 4 fresh A-76 button
cell batteries as shown.
Remove base cover.
Replace base cover, and
re-attach screws tightly.
LAUNCH
• Peel and apply sticker to smooth side of Bit Chip.
• Move ON/OFF switch to ON position. (Use tip of
ripcord to move switch.)
• Insert ripcord into launcher as shown. (NOTE:
Use left-spin launchers for Left Spin gears; use right-
spin launchers for Right Spin Gears.)
Insert posts on launcher into openings
in BEYBLADE®* top, as shown.
Launcher should stay attached
to BEYBLADE top when inserted
correctly.
Holding the launcher
securely, pull the ripcord
over the BEYSTADIUM
(not included)
-the BEYBLADE top will
spin... launch... and
battle!
Hold lower half of
launcher and rotate
BEYBLADE top left to
lock it in place.
When not playing, move
ON/OFF switch to OFF
position.