Summary of Contents for Unoclean FM17
- Page 1 Operator’s Manual FM17 and FM20 Multifunction Floor Machine UnoClean 224-654-6500...
-
Page 2: Table Of Contents
3.1 How to install the Brush and Pad Driver 3.2 How to adjust the Handle 4.0 Power connection 5.0 How to operate the machine 5.1 How to start/stop the machine 5.2 How to control the machine 6.0 Maintenance 7.0 Common malfunction diagnosis UnoClean 224-654-6500... -
Page 3: Safe Operation Instructions
Training is recommended before using the FM17/FM20. If the operator is unable to understand the instructions, please have a qualified person provide proper training on how to operate this equipment. - Page 4 Only authorized personnel should carry out maintenance and repairs. Ensure all fasteners are kept tight and adjustments are made according to the specified guidelines. The machine is heavy. Seek assistance before attempting to lift it for transport or move it off its wheels. UnoClean 224-654-6500...
-
Page 5: Machine Instructions
2.0 Machine instructions The FM17/FM20 Single Disc Scrubber is a versatile and dependable floor cleaning machine designed professional cleaning companies. With its straightforward design, smooth operation, and large solution tank, it excels at cleaning a variety of hard floor surfaces. The FM17/FM20 delivers the quality and performance required to meet the demands of professional cleaning. -
Page 6: How To Prepare The Machine For Operation
Push the handle at the bottom of the handle back into locking position NOTE: For the optimal operating position, keep your back straight and bend only your arms. Hold the handle close to your body for maximum control. UnoClean 224-654-6500... -
Page 7: Power Connection
Never start the machine when the handle is in a vertical position. The handle features a start lock mechanism designed to prevent the machine from operating in this position. Both hands of the operator should grip the handles when starting the machine. Figure 3 UnoClean 224-654-6500... -
Page 8: How To Control The Machine
Additionally, a lock mechanism is activated when the handle is in the vertical position. If the start/stop switch is damaged and the machine fails to start, please return it to the nearest Authorized Service Center for switch replacement and testing. UnoClean 224-654-6500... - Page 9 Any issues resulting from disassembly will not be covered by the manufacturer or seller. For safe operation and to extend the life of your UnoClean product, always use genuine UnoClean replacement parts. UnoClean...
- Page 10 Brush/pad driver warp Replace brush/pad driver damage Machine rocks or Brush/pad driver are not in Make brush/pad driver in center position vibrate severely center position Motor bearing broke Replace motor bearing Vibration noise Wheels loose Fasten the wheels UnoClean 224-654-6500...
-
Page 11: Product Guarantee
● The guarantee is void if the product is resold. ● The manufacturer is not liable for any incidental or consequential damages and reserves the right to change specifications without notice. ● The guarantee does not affect your statutory or legal rights. UnoClean 224-654-6500...
Need help?
Do you have a question about the FM17 and is the answer not in the manual?
Questions and answers