Advertisement
Table of Contents
Advertisement
Table of Contents
Summary of Contents for Gotharman's zaTurn
- Page 1 Gotharman’s zaTurn Modular Synthesizer Update Manual 11.38...
- Page 2 Table of Contents USB MIDI .............................. 3 Connecting ............................3 USB page ............................5 MIDI Start/Stop Sync ..........................6...
-
Page 3: Usb Midi
It is now possible to connect MIDI keyboards and pad controllers, which have USB connectors, directly to Zaturn! Zaturn will, in most cases, both supply the power, and receive the USB MIDI messages from the connected device, all with only one cable connection! - Page 4 Now the controller will only be powered from the USB connector, and you can connect a normal MIDI cable from the controller MIDI out to Zaturn MIDI in. If the device is drawing more than 100 mA, the USB MIDI system will not connect, but it will still...
-
Page 5: Usb Page
USB page When a USB MIDI device is connected to the Zaturn USB connector, it enters USB MIDI mode, and the USB page will now look different, than when connecting a USB memory stick. Currently this page only has one parameter:... -
Page 6: Midi Start/Stop Sync
MIDI Start/Stop Sync A new MIDI sync mode has been added to the Sync parameter on the MOR>COMMON page. It is now possible to select: Int: The sequencer syncs to the internal clock/tempo. Ext: The sequencer syncs to a MIDI clock applied to the MIDI input or the USB connector. The sequencer will also start and stop, when MIDI start and stop messages are received. - Page 7 Written by Flemming Christensen 2025...
Need help?
Do you have a question about the zaTurn and is the answer not in the manual?
Questions and answers