PITSOS DIS4315 - annexe 1 Instructions

Brief and handy:
en
everything your dishwasher
needs ...
Before using for the first
time, read the operating
instructions!
Filling the salt dispenser
Adding rinse aid
Adding detergent
Switching on the appliance
Select programme
Start programme Here we go ...
Switch off the appliance Everything o.k. ...
Adjusting the water softening system *
Read off the correct setting for your water hardness
Ask your water supply
company what the water
hardness is and enter ...
°Clarke Hardness
range
0–8 soft
9–20 medium
* only before the first wash
21–26 hard
or if the water hardness
has been changed
hard
27–44
Dissolves limescale (not necessary for set value 0 !) ...
Unscrew
cover.
Spick and span ...
Press mark 1,
lift up cover 2.
A lot of dirt, a lot of detergent ...
If required, open Attention
the cover (press
Combination
button).
products are not
suitable for all
programmes, follow
manufacturer's
instructions.
Quick, economical or intensive ...
Overview of programmes
The max. possible number of programmes is illustrated
in this overview. The corresponding programmes for your
appliance can be found on the fascia.
The programme data has been measured in the laboratory
according to European standard EN 50242.
Deviations are possible in practice.
*
half normal load
Additional options **
Express Wash Half load
(VarioSpeed)
... for a few items, saves
... is obtained by
water, energy and time
increased energy
consumption at a
constant cleaning and
drying performance.
** depending on model
Quickly sorted ...
How to adjust the water softening system
– Switch on ON-/OFF-switch.
– Press and hold down the Start button.
mmol/l Setting
– Rotate programme selector by one notch to the left or to the right.
– Release button.
0–1,1 0
The display
Change the setting as follows:
1,2–2,9 1
– Rotate programme selector until the required setting has been selected.
3,0–3,7 2
– Press Start button.
The display
3,8–6,2 3
Fill the salt
dispenser with
water before the
first wash only.
Refill if rinse-aid refill indicator is lit!
Intensive Normal
70_ 65_
Duration: hs/mins
2:15 2:00
Energy Consumption: kWh
1,50 1,45
Water consumption in litres 15 14
Flexibility ...
IntensiveZone
... perfect for a mixed
load. Washing pressure
and washing
temperature are
increased slightly.
flashes and the display is lit (= Setting 1).
goes out. The selected setting is saved.
Add salt Screw on the
(never add cover. Wash
detergent!). immediately.
Adding Screw on
rinse aid. the cover.
CLICK!
Adding Slide cover
detergent. shut, press.
PLOP!
Eco Gentle Quick
50_ 40_ 45_
*
2:20 1:10 0:29
1,05 0,80 0,80
14 13 10
Hygiene Extra drying
... The temperature is ... improves the drying
increased during result by increased
the rinsing process. This temperature in the final
increases the hygiene rinse (Please take care
status. with delicate dishes)
Prerinse
0:15
0,05
4