Mizar ACUS 1.0 Operating And Installation Instructions

power
25W - Led C.O.B
700mA Costant Current
power supply
Integrated driver
Insulation class III class
IP rating
IP66 / IP67
IK rating IK 10
operating temperature -20°C / +50°C
size Ø 140 x 106 mm
f light source flux
2652 lm (3000K)
effective flux
2005 lm (3000K)
non-orientable TIR lens (Acus 1.0)
optics non orientable metallised
tecnopolymer reflector (Acus 1.1)
14° - 35° - 55° (Acus 1.0)
beam angles
12° - 25° - 40° - 60° (Acus 1.1)
CCT 2700K - 3000K - 4000K
CRI CRI 90
BIN selection 3 Step MacAdam
body materials
anticorodal aluminium
6082 anodised black 20μ
aisi 316L electropolished
frame
shot peened stainless steel
tempered extra-clear glass 12 mm thick
screen
installation with formwork
connetion via quick connector supplied
power cable
electrical connection serial connection
weight 1325 g (Acus 1.0) - 1300 g (Acus 1.1)
IdroSkud® System
protection system
_ polarity reversal protection
_ voltage peak protection
_ water ingress protection
This product contain an energy class F light source.
DISPOSAL OF MATERIALS
Dispose of the product in an eco-compatible manner
and in accordance whit national legislation
For Countries in the European Union:
Pursuant to the Directive no. 2012/19/EU on waste electrical
and electronic equipment (WEEE).
The crossed out wheelie-bin symbol on the equipment or its pa-
ckaging means that when the product reaches the end of its us-
efull life it must be collected separately from other waste.
Proper separate collection of the discarded equipment for the
later enviromental-friendly recycling, processing and disposal,
helps to avoid any negative impact on the enviroment and heal-
th and encourages re-use and recycling of the materials the
equipment is made of.
In each individual Member State of the European Union this
product is required to be disposed of in accordance with Direct-
ive 2012/19/EU as implemented in the Member State where
the product is disposed of.
For futher information please contact REER or your local dealer.
The precise and complete observance of all rules,
indications and prohibitions set out in these instr-
uctions is an essential requirement for the correct
operation and use of the product. Mizar, therefore,
declines all responsibility for anything deriving from
the non-observance, even partial, of these instructions.
Specifications subject to change without notice.
Total or partial reproduction is prohibited without Mizar
permission.
M A D E I N I T A LY
ACUS 1.0 - 1.1
DRIVE OVER RECESSED SPOTLIGHT
8543328
OPERATING AND INSTALLATION INSTRUCTIONS
MIZAR is a R
via Carcano 32 | 10153 Turin | ITALY
Ph. +39 011 9969833
e-mail: aftersales@mizar.it | www.mizar.it
8543328_0
R S.p.A. brand
ee