PITSOS DGS6512 Instructions For Use Manual page 19

Interrupting the programme
Set main switch
Indicator lights extinguish. The
programme is retained in the
dishwasher memory.
If the hot water was switched ON or the
appliance has already heated up and then
the appliance door opened, leave the door
ajar for several minutes and then close.
Otherwise, the appliance door may fly
open due to expansion.
In order to continue with the stored
programme, set the main switch to ON
again.
Terminating the programme
(Reset)
Only when the main switch is on:
Rotate programme selector to the
Reset position. The digital display
indicates after approx. 3 sec.
The programme sequence lasts
approx. 1 min.
When the programme has run,
switch off the main switch
To restart, rotate the programme selector
to the required programme. Switch on
3
the main switch
1
sequence starts automatically.
Changing the programme
It is possible to change the programme
within 2 minutes after you have switched
the dishwasher on.
Should it be necessary to change the
programme after this period, the
programme cycle that has already been
begun (e.g. washing) will be completed
first of all.
The new remaining time displayed is the
sum of the remaining time from the
preceding programme cycle and the
remaining time attributable to the new
programme that has been selected.
to OFF.
1
.
1
. The programme
Intensive drying
By activating the "Intensive drying"
function, the final rinse will produce
a higher temperature in all programmes
resulting in an improved drying result
(please note that higher temperatures
might have an effect on delicate items).
Close the door.
Hold down button B and
switch on main switch
Release both buttons.
The digital display
(on) or (off) and button B flashes.
To change the setting, press
button B .
Switch off the main switch
chosen setting has now been stored.
en
.
1
indicates
8
; the
1
19