Advertisement
Quick Links
Service Locations
1
CB-1 Location
2
Compressor Filters
and Fill Point
3
Hydraulic Motor
4
Fuse and
Relay Panel
5
Brush Location
6
Serial Number
Location
Control Panel
1
Start Button
2
Home Screen
3
Adjust Control/Select Button
4
Soft Buttons
Turning Unit On
Crane/PTO enable signal must be provided to turn unit on.
Refer to section 5-8 of the Owner's Manual for more information.
The display will turn on whenever the Crane/PTO power
is present.
Press the Start Button to turn the unit on and engage the
hydraulic motor.
Use the soft buttons to open the Weld/Battery Charge and
Settings screens.
Turning Unit Off
Press the Start button to turn the unit off.
Control display will turn off when the Crane/PTO power is
turned off.
HDI
265/325 Air Pak
™
Quick Start Guide
(Refer to section 7-1 of Owner's Manual)
WARNING
READ INSTRUCTIONS.
• Read and follow all labels and the Owner's Manual carefully before installing, operating or
servicing unit. Read the safety information at the beginning of the manual and in each section.
1
2
4
3
6
5
2
4
4
4
3
™
4
4
1
Advertisement
Summary of Contents for Miller HDI 265 Air Pak
- Page 1 265/325 Air Pak ™ ™ Quick Start Guide Service Locations CB-1 Location Compressor Filters and Fill Point Hydraulic Motor Fuse and Relay Panel Brush Location Serial Number Location Control Panel (Refer to section 7-1 of Owner’s Manual) Start Button Home Screen Adjust Control/Select Button Soft Buttons Turning Unit On...
- Page 2 Home Screen (Refer to section 7-2 of Owner’s Manual) Home Screen Status Bar Text RPM Gauge Displays generator RPM. Air Compressor PSI Gauge The MIN and MAX settings are indicated by yellow band. Hydraulic Temperature Gauge Soft Buttons Weld Operation Button Opens the Weld screen.
- Page 3 System Settings (Refer to section 7-4 of Owner’s Manual) To Change System Settings Step 1: Rotate Adjust Control/Select button to select a setting. Step 2: Press Adjust Control/Select button on desired setting. Step 3: Rotate Adjust Control/Select button to update the setting. Step 4: Press Adjust Control/Select button to discard setting change.
- Page 4 Service Contact 296933-B Phone NOTE: Scan the QR code on the control panel or under the top cover to get electronic access to: Product regristration, Owners manual and Email other helpful information. MillerWelds.com #400017 © 2025 Miller Electric Mfg. LLC...
Need help?
Do you have a question about the HDI 265 Air Pak and is the answer not in the manual?
Questions and answers