KBP3010 15-06-2004 12:02 Pagina 1 CORDLESS KETTLE KBP3010 Please retain these instructions for future reference...
Page 2
KBP3010 15-06-2004 12:02 Pagina 2 Spout FiIter (Inside the Spout) Body Kettle KBP3010 Description of Appliance The following terms are used throughout the instruction manual Filter Latch Handle Water level indicator ON/OFF switch and indicator light 360 base with cord storage...
If the kettle is overfilled, there is a risk that boiling water may be ejected causing burns. A handy water level viewer enables you to see the quantity of water in the kettle. Fig.1 fig.2 Fig.3 CORD EXIT Fig.4 1,5 l 0,8 l Fig.5 Kettle KBP3010...
If this cut-out operates, disconnect the kettle from the mains supply and leave to cool down before refilling with cold water (otherwise the element could be damaged). 3) If the kettle is lifted from base while operating (ON), it will automatically switch off. Kettle KBP3010...
Page 5
• Empty the kettle and remove the filter by pushing as shown in fig. 1. • Rinse under a tap whilst brushing with a soft brush (fig. 2). • Replace the filter (fig. 3). Kettle KBP3010...
• Never move the kettle whilst it is in use. • Do not use the kettle if you have wet hands. • Keep the kettle, the power base, and the mains lead away from hotplates, hobs or burners. Kettle KBP3010...
Page 7
• The power cable must not be replaced by the user as this requires the use of special tools. If the power cable is damaged, contact an authorized Service Centre. • If the kettle is overfilled, boiling water may overflow. Kettle KBP3010...
Only 13amp replacement fuses which are ASTA approved to B.S. 1362 should be fitted. This appliance conforms to the Norms EN 55014 regarding the suppression of radio interference. Kettle KBP3010 Electrical Requirements GREEN AND YELLOW EARTH BLUE...
Need help?
Do you have a question about the KBP3010 and is the answer not in the manual?
Questions and answers