Hagiwara Sys-Com MFD35C S Series Manual

Overview
The drive in this series is a 3.5" SCSI flash drive. The interface that links the drive in this series and the
host system conforms to the SCSI-2 standard (X3.131-1986: Small Computer System Interface) and the
ANSI SCSI-3 FAST-20 standard (X3T10/1071D).
Features
 Capacity
512MB, 1GB、2GB、4GB、8GB
 Form Factor
3.5 inch type (HDD compatible)
 SCSI Interface
Single-Ended Narrow SCSI
SCSI-2 command set compatible
Asynchronous mode
Synchronous mode
 Power supply
DC 5.0V ± 10%
 Environmental conditions
Operating temperature
Operating Humidity
Storage temperature
Storage Humidity
Performance

Transfer rate
Read speed
Write speed
Shock resistance
Vibration resistance
ECC
 Data Reliability
Write/Erase endurance
SCSI Model Flash Drive
--- MFD35C-xxxxS Series ---
5.0MByte/sec(Max.)
5.0MByte/sec
10.0MByte/sec[Fast SCSI]
20.0MByte/sec[Fast–20(Ultra SCSI)]
0°C to 60°C
~85% (Max) [Non condensing]
-20°C to 65°C
~95% (Max) [Non condensing]
20.0MByte/sec(Max.)
17.0MByte/sec(Max.)
8.0MByte/sec(Max.) [128MB,256MB]
12.5MByte/sec(Max.) [512MB,1GB,2GB]
15.0MByte/sec(Max.) [4GB,8GB]
10780 m/s
161.7 m/s
4-bit error correction
100,000 cycles
Model Code MS3C03
MFD35C-xxxxS Series
2
(1100G) (Max) [Non-operating state]
2
(16.5G) peak (20Hz~2000Hz) [Operating state]
Rev1.00
SAMFD35C0001-A01
2008-6-17 1/15