Advertisement
Table of Contents
Advertisement
Table of Contents
Summary of Contents for HDWR SecureEntry-ConWG-USB
- Page 1 User Manual Wiegand to USB Signal Converter SecureEntry-ConWG-...
- Page 2 Table of contents Specifications: ................................3 Set contents: ................................... 4 Features: .................................... 4 Connection diagram ..............................5...
-
Page 3: Specifications
Specifications: • Warranty: 1 year • Device Type: Wiegand to USB Converter for Access Control Devices • Interface: USB Plug & Play • Conversion Method: Wiegand to USB • Supported OS: WinXP / Win7 / Win10 / Linux / Android •... -
Page 4: Set Contents
Set contents: • Access Control Converter • USB cable Features: • The SecureEntry-ConWG-USB converter converts signals from the Wiegand interface to USB-compatible signals, allowing access control devices to be easily integrated into a PC. • The small size and lightness of the device save working space and allow for easy portability. -
Page 5: Connection Diagram
Connection diagram Steps to follow: 1. Connect the converter and your computer with a USB cable. 2. Connect the reader's DC12V cable to the DC12V jack on the converter. 3. Connect the reader cable D0 to the converter's D0 socket. 4. - Page 6 6. The data can be displayed in a text editor. The converter automatically identifies the Wiegand 26/34 format supporting the appropriate one. 7. Wiegand 26 3-byte output. 8. Wiegand 34 4-byte output...
- Page 7 9. Note that the same readers by default, Wiegand 26 and Wiegand 34, must be connected by a grey wire (depending on the reader) to the GND socket, in this case the output bits of Wiegand 34 require both the GND wire of the reader and the grey wire to be connected at the same time to the GND of the converter.
Need help?
Do you have a question about the SecureEntry-ConWG-USB and is the answer not in the manual?
Questions and answers