Advertisement
Quick Links
Advertisement
Summary of Contents for Instruo dha
- Page 1 dhà Stereo Mixer Module User Manual...
- Page 2 Contents Description / Features Installation / Specifications Overview Channel 1 Channel 2 Mixer Normalling Expansion...
- Page 3 Description The Instruō dhà is a compact yet powerful stereo mixer module designed for seamless integration into Eurorack systems of any size. It features two stereo input channels, with the top channel including a built-in stereo VCA for expressive amplitude modulation and precise audio-tapered level control—all within a small footprint.
-
Page 4: Installation
Installation 1. Confirm that the Eurorack synthesizer system is powered off. 2. Locate 4 HP of space in your Eurorack synthesizer case. 3. Connect the 10 pin side of the IDC power cable to the 2x5 pin header on the back of the module, confirming that the red stripe on the power cable is connected to -12V. - Page 5 dhà | da | (utility) beacuse two is one and one is none – LEVEL STEREO STEREO LEVEL dhà 1. Channel 1 Inputs 7. Channel 2 Level Knob 2. Channel 1 Level Knob 8. Mixer Outputs 3. Channel 1 Level CV Input 9.
- Page 6 Channel 1 Inputs: Inputs provide access to the stereo VCA via two mono input jacks. • The signal present at the left Input normals to the right Input if no cable is connected to the right Input. Level Knob: Level Knob sets the amplitude of the stereo VCA.
- Page 7 Channel 2 Inputs: Inputs provide access to the second mixer channel of dhà via two mono input jacks. • The signal present at the left Input normals to the right Input if no cable is connected to the right Input. Level Knob: Level Knob sets the amplitude of the signals present at...
- Page 8 Mixer Outputs: Outputs are the summed signal outputs of channel 1 and channel 2.
- Page 9 Normalling Normalling Switch: Normalling Switch is a switch on the back side of dhà that sets the normalling behavior of the Outputs as they apply to Stereo Output Back Jack. • If the Normalling Switch is set to its upward position, the channels are set to Half Normalled.
- Page 10 Expansion Stereo Input Back Jack: Stereo Input Back Jack is an external stereo input positioned on the back of dhà. • Modular level stereo output jacks mounted on the back of secondary modules like additional dhà or càrn modules can connect to dhà...
- Page 11 This device meets the requirements of the following standards: EN55032, EN55103-2, EN61000-3-2, EN61000-3-3, EN6231 1.
Need help?
Do you have a question about the dha and is the answer not in the manual?
Questions and answers