Summary of Contents for anko AKFP2000
- Page 1 Heated Foot Warmer Instruction Manual AKFP2000 Rev 01 To ensure proper operation of this device, please read this instruction manual carefully before using the device and keep it for further reference.
- Page 2 IMPORTANT SAFETY INSTRUCTIONS - RETAIN FOR FUTURE USE SAVE THESE INSTRUCTIONS When using electrical products, especially when children are present, • DO NOT use outdoors. basic safety precautions should always be followed, including the following: • Use heated surfaces carefully. May cause serious burns. DO NOT use over insensitive skin areas or in the presence of poor circulation.
-
Page 3: Temperature Adjustment
INSTRUCTIONS FOR USE INSTRUCTIONS FOR USE TURNING ON • Plug the USB-C cable into the input port at the side of the button. • Connect the USB end of the cable into a USB power adaptor. WARNING: An Australian approved USB power adaptor must be used to FEET ENTRY POINT power this unit. -
Page 4: Maintenance
MAINTENANCE NOTES TO CLEAN WARNING: The foot Warmer must be turned off and disconnected from power first. • Only the upper fabric section is washable. • Use the zipper to disconnect the upper fabric from the base fabric. • The upper fabric may be hand washed or washed by machine. •...
Need help?
Do you have a question about the AKFP2000 and is the answer not in the manual?
Questions and answers