Analog way COREPLAY SOLO User Manual page 8

Analog Way CorePlay Solo User Manual Firmware V1.1 Hardware Specifications
2. Hardware Specifications
2.1. General safety instructions
2.1.1. English
All of the safety and operating instructions should be read before the product is operated and should be
maintained for further reference. Please follow all of the warnings on this product and its operating
instructions.
• WARNING: Not suitable for children. To prevent the risk of electric shock and fire, do not expose this device
to rain, humidity or intense heat sources (such as heaters and direct sunlight). This equipment is not
suitable for use in locations where children are likely to be present.
• INSTALLATION: Slots and openings in the device are provided for ventilation and to avoid overheating.
Make sure the device is never placed near a textile surface that could block the openings. Also keep away
from excessive dust, vibrations and shocks.
• POWER: Only use the power supply indicated on the device of the power source. Devices equipped with a
grounding plug should only be used with a grounding type outlet. In no way should this grounding be
modified, avoided or suppressed. Connection of equipment to main supply must be after branch circuit
breaker of the building installation.
For equipment identified with the symbols above, only an instructed person is allowed to connect and
disconnect mains cable from the unit. Grounding is mandatory before plug connection.
Use a grounding cable to connect a screw on the unit chassis to ground.
• POWER CORD: The device is equipped with one or multiple detachable power cords.
A device identified with the symbol above indicates that the equipment has multiple power cords. To remove
mains, an instructed person shall disconnect all power cords at appliance power inlet.
Caution

The power cords constitute the only mean to completely disconnect the equipment from the main power.
For equipment equipped with multiple power cords: To remove power from product, always disconnect each
power cord at appliance inlet. It is not allowed to connect them to intermediate terminal between product
and plug in the wall that could be used to disconnect several power supplies giving access to live parts at a
point where mains was disconnected.
8 03/2025