Starfish S11282 Installation And Safety Instructions

REMOTE FOR STARFISH
Model: S11282
INSTALLATION AND SAFETY INSTRUCTIONS
IMPORTANT: Read before installing fixture. Retain for future reference.
INSTRUCTIONS
1. Pairing
Connect the lighting device(s) in the Starfish App. If the lighting device(s) is not
connected to the Starfish App first, it will not be able to be paired to the remote
control. Turn off the power to the lighting device(s) and turn the power back on.
Press and hold one of the Group buttons on the remote control, the remote
control will start searching for devices, the lighting device(s) will flash to indicate
that the remote control paired successfully. Once the device(s) is successfully
paired, release the group button, the lighting device(s) can be controlled by the remote control.
2. Brightness Adjustment
Short press Brightness (+)
to decrease the brightness of the lighting devices.
3. Color Temperature (CCT) Adjustment
Short press the color temperature
cooler white. Short press the color temperature
they change to warmer white.
4. Effect Loop
Each time you short press the
the order in the App: Night, Read, Working, Leisure, Soft, Colorful, Dazzling, and Gorgeous.
5. RGB loop
Short press the
blue, magenta" sequence. Long press the
Group
1. Turn the power to the lighting device(s) off and then turn the power back on. Press and long hold the Group button
A, B, C or D, remote control will begin to pair lighting device(s) into the group. The lighting device(s) will flash to indicate
that it paired successfully. Once all lighting device(s) have paired, release the Group button.
2. Press the Group button A, B, C or D: turn on or off the devices paired in that group.
3. Press both the Group button and Brightness (–)
4. Press the Group A, B, C or D button to automatically switch to that group. The brightness/color temperature/RGB/Effect
and other functions can be operated in that group.
5. Press the on/off button during group operation, all the devices paired to this remote control can be controlled at the
same time, and all the brightness/color temperature/RGB/scene functions can be operated on all the devices.
Starfish Compatibility List
Scan QR Code for compatible Starfish lights/products that the remote can work with.
ME!
PLEASE
SCAN
© Copyright 2024 Satco Products, Inc. 9/24 v5.0
to increase the brightness of the lighting device(s) and short press Brightness (–)
to increase the color temperature (CCT) of the lighting devices, so they change to
button, it loops to the next Effect as set in the App. The Effect order is similar to
button once to cycle to the next color, the color will loop in "red, orange, yellow, green, cyan,
LIGHTING
™
to decrease the color temperature (CCT) of the lighting devices, so
button for 5-10 seconds, the colors will begin to cycle automatically.
key at the same time: remove all devices in that group.
1
Download the STARFISH App
Satco Products, Inc.
Brentwood, NY 11717