U-Line H-5672 Manual

H-5672
DIGITAL WALL CLOCK
SETUP
Plug clock into standard electrical outlet. Clock displays
88:88
. (See Figure 1)
NOTE: PM is indicated by the PM indicator light
in upper left-hand corner on front display.
Figure 1
PM indicator light
SET TIME
Locate two buttons on back of clock. Press the
HR button to set hour, and MIN button to set minute.
(See Figure 2)
Figure 2
PAGE 1 OF 3
1-800-295-5510
uline.com
MIN HR
MIN HR
OPERATION
24-HOUR MODE
NOTE: Clock's default setting is 12-hour mode.
1. Locate two buttons on back of clock.
2. Press both buttons at same time and hold until clock
24
displays
00:00
. (See Figure 3)
Figure 3
24
3. Set time according to Set Time instructions.
4. To return to 12-Hour mode, repeat steps 1-3.
NOTE: Display will show
buttons and displaying
RESET
To reset the clock, hold both the hour and minute
buttons at the same time for eight seconds. The
clock will reset to the
Para Español, vea página 2.
Pour le français, consulter les page 3.
,
then release buttons. Clock will display
12
before releasing
00:00
.
88:88
format.
0225 IH-5672