KITCHENPRO PREP Owner's Manual

Mason jar vacuum sealer kit

Advertisement

PREP
Mason Jar Vacuum Sealer Kit
Owner's Manual
IMPORTANT
This instruction manual contains important information necessary for the
proper assembly and safe use of the appliance.
Read and follow all warnings and instructions before assembling and using the
appliance.
Keep this manual for future reference.
KITCHEN PRO PREP MASON JAR VACUUM SEALER KIT 652442

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PREP and is the answer not in the manual?

Questions and answers

Summary of Contents for KITCHENPRO PREP

  • Page 1 This instruction manual contains important information necessary for the proper assembly and safe use of the appliance. Read and follow all warnings and instructions before assembling and using the appliance. Keep this manual for future reference. KITCHEN PRO PREP MASON JAR VACUUM SEALER KIT 652442...
  • Page 2: Product Features

    The Kitchen Pro Prep Mason Jar Vacuum Sealer Kit creates an airtight vacuum seal on both regular and wide mouth mason jars, keeping your food fresh for longer. By sealing out oxygen, it helps prevent spoilage, oxidation, and flavour loss, extending the shelf life of ingredients while preserving their original taste.
  • Page 3 5. When the power display is lower than 20%, recharge the battery. 6. The appliance is not waterproof, so never immerse it in water or any other liquid. GET TO KNOW THE KITCHEN PRO PREP MASON JAR VACUUM SEALER KIT Jar cap opener...
  • Page 4 OPERATING INSTRUCTIONS Before use, select the required suction end, as per the above diagram, based on the size of the mouth of the jar (‘regular mouth’ or ‘wide mouth’). To remove the ‘regular mouth suction end convertor’ from the host, rotate it clockwise until you hear a ‘click’ sound and then pull the two pieces apart.
  • Page 5 3. Align the lid with the jar 4. Align the sealer with the jar mouth and then place the mouth and press the sealer lid on the jar mouth. down firmly. NOTE: The default sealing time is 30 seconds. The minimum adjustable time is 20 seconds and the maximum is 150 seconds.
  • Page 6: Cleaning And Maintenance

    CHARGING THE VACUUM SEALER 1. During the sealing process, if the power indicator light flashes several times and the sealer stops working, it means the device has low battery power. Please charge the device with the included USB-C cable. 2. The green charging indicator light will flash when the device is charging.
  • Page 7: Troubleshooting

    TROUBLESHOOTING Problem Resolution 1. Check for any dirt or liquid on the bottle mouth and lid. 2. Check that the sealing rubber rings of the wide port are not offset. 3. When using, check that the sealer has been firmly attached to the jar and pressed to the bottom.
  • Page 8: Warranty

    Problem Resolution 1. Please check the above four points firstly and try again. 2. Check that the regular port converter is fully inserted Regular mouth mason jars into the sealing rubber ring cannot be sealed of the wide port. If you are unsure, repeat the action to make sure it is done as required.
  • Page 9 Guarantee Exclusions We warrant that, subject to This warranty does not apply the exclusions and limitations if proper care and/or usage below, the Product will be instructions are not followed. free from defects in materials This warranty does not cover and workmanship under scratches, stains, discoloration normal domestic household...

This manual is also suitable for:

652442

Table of Contents