NEXTIVITY SHIELD MegaFi 2 Mobile Quick Start Manual

Copyright © 2025 by Nextivity, Inc, U.S. Patents pending. All rights reserved. The Nextivity
and CEL-FI logos are registered trademarks of Nextivity Inc. All other trademarks or registered
trademarks listed belong to their respective owners. Designed by Nextivity Inc. in California.
qsg-megafi2-Mobile_eng_25-0304
Install SIM
A
If your Nextivity Partner has
preinstalled the SIM, skip to step 1
(Connect Antennas to the Router).
C
Remove the SIM tray with the
included SIM Ejector Tool by inserting
the tool into the hole on the SIM tray;
the tray should pop partway out.
Remove the SIM tray completely.
For more information scan the QR code or contact
Customer Support at: support@nextivityinc.com
B
Remove the SIM card cover by
pressing a thumbnail or flathead
screwdriver in the gap between the
metal and plastic. You should now
see the edge of the black SIM tray.
D
Insert your activated SIM into the right side up
tray. Note: Flip the tray around so
that the tray is notched so the card
can be inserted the correct way.
Press the cover back into place.
For product information scan the QR code or refer to the
MegaFi 2 documentation at
https://nextivityinc.com/products/shield-megafi-2-hpue
SHIELD
MegaFi 2 Mobile
Quick Start Guide
upside down
Included In the Box
DC power cord Roof antenna
SIM ejector tool Router
®
Ethernet cable