Advertisement
Quick Links
Growatt GroPlug-X
Quick Configuration Guide
Step2.
Register
First, connect the phone to a router on the wireless
network.
Run ShinePhone APP to enter the registration page.
Fill in the registration information, click Register.
Step4.
Configure network
Connect the GroPlug-in X to the mains, and press 5S to access the Bluetooth distribution network
LED Status
Off
Green
Flashing Blue
Step1.
Scan the QR code below to download
ShinePhone, or search for ShinePhone in App
Store or Google Play to download.
Make sure you have the latest version of the
software installed.
If you need more details, please visit
http://Server.growatt.com.
GroPlug-X does not start properly:
1. Check whether the Groplug-X is connected to the Grid.
2. Plug and unplug the Groplug-X.
3. Connect the GroPlug-X to another location.
GroPlug-X outputs normally, but does not enter the
configured network state; Press and hold the button again to
enter the distribution network state.
GroPlug-X enters the distribution network state, and you can
configure the network.
Download the ShinePhone APP
【Android & IOS】
Step3.
Add a power station
The page for adding a power station is
displayed.
Fill in power station information and Click
"Add Plant".
Troubleshooting
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Growatt GroPlug-X
Summary of Contents for Growatt GroPlug-X
- Page 1 Connect the GroPlug-in X to the mains, and press 5S to access the Bluetooth distribution network LED Status Troubleshooting GroPlug-X does not start properly: 1. Check whether the Groplug-X is connected to the Grid. 2. Plug and unplug the Groplug-X. 3. Connect the GroPlug-X to another location. GroPlug-X outputs normally, but does not enter the Green configured network state;...
- Page 2 Step5. Add GroPlug-X Go to the Add device page, click Add GroPlug-X , complete the device network allocation and binding according to the APP instructions. If you do not need to associate NOAH 2000, skip Step6. Step6. Binding GroPlug-X to your NOAH 2000 Go to the setting page of the corresponding NAOH 2000 power station, click Related Plug, and enter the SN corresponding to GroPlug-X (Maximum of 5PCS can be binding).
Need help?
Do you have a question about the GroPlug-X and is the answer not in the manual?
Questions and answers