Table of Contents
Advertisement
Quick Links
SIP Industrial Products Limited
Gelders Hall Road
Shepshed
Loughborough
Leicestershire
LE12 9NH
United Kingdom
For help or advice please contact
your distributor, or sip directly on:
Tel.: 01509 500400
Email:
sales@sip-group.com
or
customerservice@sip-group.com
www.sip-group.com
SIP FX200 Welding Fume Extractor
SIP Code 05813
Please read and fully understand the instructions in this manual before
operation. Keep this manual safe for future reference.
1
Advertisement
Table of Contents
Related Manuals for SIP FX200
Summary of Contents for SIP FX200
- Page 1 SIP Industrial Products Limited Gelders Hall Road Shepshed Loughborough Leicestershire LE12 9NH United Kingdom SIP FX200 Welding Fume Extractor SIP Code 05813 For help or advice please contact your distributor, or sip directly on: Tel.: 01509 500400 Email: sales@sip-group.com Please read and fully understand the instructions in this manual before operation.
- Page 3 INDEX Page Description 4 - 9 Safety Instructions Guarantee Technical Specification 12 - 14 Getting To Know Your Fume Extractor 15 - 17 Operating Instructions 18 - 20 Maintenance Troubleshooting Exploded Drawing Parts List UK Declaration Of Conformity EU Declaration Of Conformity...
-
Page 4: Safety Symbols Used Throughout This Manual
SAFETY SYMBOLS USED THROUGHOUT THIS MANUAL Danger / Caution: Risk of electrical injury or damage. Danger / Caution: Risk of injury or damage. Danger / Caution: Risk of personal injury and / or the possibility of dam- age. ATTENTION: draws attention to situations and problems associated with the efficiency of the machine that do not affect the safety of people. -
Page 5: Safety Instructions
SAFETY INSTRUCTIONS • Do not use the machine in places where there is a risk of explosion or fire. Do not approach the machine with naked flames or other. • Use the machine in a dry environment, not subject to condensation phenome- na of atmospheric humidity and protected from direct exposure to atmospher- ic agents and sunlight. - Page 6 • SIP Industrial Products disclaims any liability for damage to the machine it- self, to people or property caused by the incorrect use of the collection cap...
- Page 7 Qualified Personnel, with expertise in the electrotechnical field, or by SIP Industrial Products / SIP Service Agent. • Adopt all the precautions according to the regulations in force if you have to operate with the machine powered on: wear insulating gloves and shoes and use insulating mats and insulated tools.
- Page 8 Warning: Always use appropriate personal protective equipment (PPE) DOCUMENTATION • The SIP FX200 machine is accompanied by this User Manual which con- tains the technical information, figures, instructions and warnings neces- sary for correct use of the product. • The User Manual must accompany the machine throughout its life cycle, even in the event of sale or transfer;...
- Page 9 • In the event that the product is damaged, do not use and report the incident to SIP Industrial Products . • Arrange a place protected from bad weather to store the product waiting for the installation, in case installation is not immediate.
- Page 10 GUARANTEE This SIP FX200 welding fume extractor is covered by a 24 month parts and labour warranty covering failure due to manufacturers defects. . This does not cover failure due to misuse or operating the extractor outside the scope of this manual - any claims deemed to be outside the scope of the warranty may be subject to charges Including, but not limited to parts, labour and carriage costs.
-
Page 11: Technical Specification
TECHNICAL SPECIFICATION 05813 SIP FX200 Welding Fume Extractor Supply Voltage 230V / 50Hz Max Power 300watt Motor Type 200Watt Digital Control Variable Speed Weight 25kg Maximum Flow Rate 300m /Hour Filter Accuracy 0.3µm Sound 75dBA Diameter of Suction Hose 58mm... - Page 12 GETTING TO KNOW YOUR FUME EXTRACTOR...
- Page 13 GETTING TO KNOW YOUR FUME EXTRACTOR Item Description Item Description Switchable Magnet Lift Handle Hood 125mm ɸ Suction Fan Motor Assy Suction Hose Mains Cable Tidy Brackets Hose Flange Emergency Stop Pull Handle Control Panel Spark Arrestor Wheel Primary Filter Stainless Steel Catch HEPA Filter CONTROL PANEL...
- Page 14 GETTING TO KNOW YOUR FUME EXTRACTOR DIMENSIONS SIZE (mm) -not including handles Width Height Length Weight GW 32kg NW 30kg...
-
Page 15: Installation
OPERATING INSTRUCTION INSTALLATION The extractor is supplied partially assembled. Follow the steps below to install. Main Unit: • Remove the extractor from the packaging • Visually check for damage • The wheels and lifting handle are pre-assembled. • Slide the push handle to the 2 spigots and tighten. Hose &... - Page 16 OPERATING INSTRUCTIONS ELECTRICAL CONNECTION Warning Read these electrical safety instructions thoroughly before connecting the product to the mains supply. This extractor is for use with a 230V UK domestic socket and should be grounded/ earthed. Make sure that the product is connected to an outlet that has the same configuration as the plug (see Fig.
- Page 17 OPERATING INSTRUCTIONS START / STOP To start & stop the extractor. ( see Control Panel page 13) • Plug in the mains plug into a socket and switch on. • The power indication light will illuminate. • Place the suction hose close to the weld area. Keep the distance between the hood and the workpiece to less than 100mm.
-
Page 18: Maintenance
MAINTENANCE The replacement of the filters, which implies clogging / air flow restriction, can vary in terms of frequency and duration of time according to the type of use. Factors to be taken into consideration are: • Material to be welded (each material and each alloy produces different fumes / micro-dust);... - Page 19 MAINTENANCE Catch Fig,1 FIRST STAGE FILTRATION: Mesh Spark Arrestor SIP Part Number: WE08-00100 Filter Material Aluminium Mesh Regeneration Yes; washable NOTE: Filter should be cleaned weekly. SECOND STAGE FILTRATION: Primary Filter SIP Part Number: WE08-00098 Filter Material Polyester Fibre Regeneration...
- Page 20 MAINTENANCE NOTE: Filter should be cleaned bi-weekly (fortnightly) to maintain optimum performance. THIRD STAGE FILTRATION: High Efficiency Filter SIP Part Number: WE08-00099 Filter Material Polyester Fibre Regeneration NOTE: Filter should be cleaned bi-weekly (fortnightly) to maintain optimum performance. NOTE: It is advisable to replace all the filters in the extractor at least once a year to maintain the maximum performance in both suction &...
-
Page 21: Troubleshooting
TROUBLESHOOTING Problem Issue Remedy Power Off Check Power & Switch Extractor fails to start Blown Fuse Test Voltage. Mains Cable Issue Check & Replace. The power indicator is Check if Start button has been Check the condition & ON but fan does not pressed. -
Page 22: Exploded Drawing
EXPLODED DRAWING... -
Page 23: Parts List
PARTS LIST Item No Description SIP Part No. Fume extractor housing WE08-00068 Threaded bolts WE08-00069 Housing back plate WE08-00070 Housing backboard cover plate WE08-00071 Housing bottom plate WE08-00072 Feet WE08-00073 Handle WE08-00074 Housing front plate WE08-00075 Air intake flange O/D 60mm... - Page 24 NOTES...
- Page 25 NOTES...
- Page 26 LE12 9NH England As the manufacturer within England, Scotland and Wales, we declare that the SIP FX200 Welding Fume Extractor : SIP Code 05813 Conforms to the requirements of the following regulation(s), as indicated: Electromagnetic Compatibility Regulations 2016 Supply of Machinery (Safety) Regulations 2008...
-
Page 27: Eu Declaration Of Conformity
County Louth Republic of Ireland As the manufacturer within England, Scotland and Wales, we declare that the SIP FX200 Welding Fume Extractor : SIP Code 05813 Conforms to the requirements of the following directive(s), as indicated: EMC 2014/30/EU Machinery Directive 2006/42/EC Low Voltage Directive 2014/35/EU RoHS 2011/65/EU &... - Page 28 FOR HELP OR ADVICE ON THIS PRODUCT PLEASE CONTACT YOUR DISTRIBUTOR, Please dispose of packaging for the product in a responsible OR SIP manner. It is suitable for recycling. Help to protect the envi- ronment, take the packaging to the local amenity tip and DIRECTLY ON: place into the appropriate recycling bin.
Need help?
Do you have a question about the FX200 and is the answer not in the manual?
Questions and answers