8. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 9. Only use attachments/accessories specified by MARK. 10. Unplug this device during lightning storms or when unused for long periods of time.
Page 3
OVERVIEW COB SPOT 50 5 is a projector which includes 1x COB LED RGBWA (5 in 1) of 50W. This device allows to obtain rich colour variations mixing these 5 tones. The configuration interface has a display with all the information and buttons to navigate through menus, selecting parameters such as manual dimmer, fixed colours and two strobe modes with speed control.
COB SPOT 50 5 can be placed in a stable surface or stand but the common operating mode is rigging it in a truss system. Please, check and follow the next recommendations for safe use of this device: The truss system must be built in a way that it can hold 10 times the weight of all rigging elements for 1 hour without any harming deformation.
ADVANCED USE CONTROL PANEL COB SPOT 50 5 can be configured in different ways thanks to its panel and selection buttons. Press the MENU button (once or several times) until you get to the desired function (according to the following chart), and press ENTER to confirm your selection.
Page 6
Display Function A001-512 9 CH DMX MODE (SELECT STARTING CHANNEL) Au 1 Au 2 GREEN Au 3 BLUE Au 4 WHITE 4K Au 5 GOLDEN AMBER Au 6 YELLOW Au 7 CYAN Au 8 LAVANDER Au 9 Au10 FIRE Au11 LIGHT MAGENTA Au12 LIME...
The electrical connection must only be carried out by qualified personal. Before installing, make sure you use the same power voltage marked in the COB SPOT 50 5 (110-240V/50-60Hz). Each device must be properly grounded and installed in accordance with the relevant standards. Don’t use the device in a lightning storm or wet environment.
Unpacking Note: Before unpacking, check it for possible damage that might have occurred during transportation or not. If you find any damage, please do not use the unit and contact the MARK dealer. TROUBLESHOOTING This short guide is meant to help and try to solve simple problems. If they continue and the device cannot operate, please, don’t try to repair it by yourself, return the device to your MARK dealer.
8. Proteja el cable de alimentación para no ser pisado o manipulado, particularmente en los conectores (mural y de entrada a la unidad). 9. Utilice únicamente accesorios especificados por MARK. 10. Desconecte el dispositivo si no va a ser utilizado durante largos periodos de tiempo.
VISTA GENERAL COB SPOT 50 5 es un proyector que incluye 1x LED COB RGBWA (5 en 1) de 50W. Este dispositivo permite obtener ricas variaciones de color mezclando estos 5 tonos. La interfaz de configuración tiene una pantalla con toda la información y los botones para navegar por los menús, seleccionando parámetros como dimmer manual, colores fijos y dos modos de estrobo con...
COB SPOT 50 5 se puede colocar en una superficie plana y estable o en un soporte, pero el modo de funcionamiento común es el rigging en un sistema truss. Por favor, compruebe y siga las siguientes...
Page 12
Utilice los botones UP y DOWN para navegar entre cada función para seleccionar el valor correcto. (Pulse ENTER para confirmar la configuración). En la siguiente tabla se muestran todas las opciones para configurar el P COB SPOT 50 5 en la interfaz del menú:...
Display Función A001-512 MODO 9 CH DMX (SELECCIONE CANAL DE INICIO) Au 1 ROJO Au 2 VERDE Au 3 AZUL Au 4 BLANCO 4K Au 5 GOLDEN ÁMBAR Au 6 AMARILLO Au 7 CIAN Au 8 LAVANDA Au 9 Au10 FUEGO Au11 MAGENTA CLARO...
Page 14
MODOS DE CONTROL DMX Las siguiente tabla muestra las funciones de los canales DMX: Modo 9 canales VALOR FUNCIÓN 0-255 DIMMER 0-255 DIMMER ROJO 0-255 DIMMER VERDE 0-255 DIMMER AZUL 0-255 DIMMER BLANCO 0-255 GOLDEN ÁMBAR SIN FUNCIÓN 10-255 ESTROBO, S>F 0-50 SIN FUNCIÓN 51-100...
Page 15
Si el dispositivo tiene un problema, siga los siguientes puntos hasta que lo encuentre y pueda solucionarlo. Si la iluminación no funciona correctamente, envíe el dispositivo al servicio técnico MARK. Si el dispositivo no enciende: Posibles problemas: Fuente de alimentación.
Need help?
Do you have a question about the COB SPOT 50 5 and is the answer not in the manual?
Questions and answers