The K 10 C is available with two different suction pipes: 103 083 000 - K 10 C with suction pipe for immersion depths of 840 mm, fits to 200 l upright drums. 103 089 000 - K 10 C with telescopic suction pipe for immersion depths between 470 and 925 mm.
2. Safety instructions The device is a state of the art piece of equipment and has been constructed according to recognised safety specifications. It is nevertheless possible that use of the device will present hazards to the operator or to third parties, or may damage the device or other property.
3. Assembly Completely remove all packaging material. The pump is now ready to use. Can also be supplied disassembled upon request. Assembly instruction then need to be followed. Assembly instructions 1. Place suction filter (1) on suction pipe (2) and fix with hose clamp (3).
6. Service The K 10 C has been produced with adherence given to the requirements of our QM system and subjected to a final inspection. It left our company in a faultless condition. If, nevertheless, there are reasons for complaints during operation, you can contact our HORN service technicians through the telephone number below.
Need help?
Do you have a question about the K 10 C and is the answer not in the manual?
Questions and answers