Page 1
Installation Guide Toilet K-3597 M product numbers are for Mexico (i.e. K-12345M) Los números de productos seguidos de M corresponden a México (Ej. K-12345M) Français, page “Français-1” Español, página“ Español-1” 1086530-2-A...
If the existing toilet does not have a supply shut-off valve below the tank, install one before installing the new toilet. Toilet is designed for 12″ (30.5 cm) roughing-in. Kohler reserves the right to make revisions in the design of products without notice, as specified in the Price Book. 1086530-2-A...
Page 3
Sponge out all remaining water from the tank. Disconnect the supply shut-off valve, if present. Remove the old toilet. Remove the old wax seal from the floor with a putty knife. Replace the old T-bolts with the new 5/16″ diameter T-bolts. Kohler Co. 1086530-2-A...
Page 4
Apply your full body weight around the toilet to set the seal. Place the bolt cap bases over the T-bolts in the ″up″ position as marked. Place the washers and nuts on the bolt cap bases and T-bolts. Carefully tighten the nuts. 1086530-2-A Kohler Co.
Page 5
Install the New Toilet (cont.) Attach the bolt caps to the bolt cap bases. Kohler Co. 1086530-2-A...
Carefully set the cover onto the tank. Flush and repressurize the toilet three times to stabilize the system. Flush the toilet several times and check all connections for leaks. Periodically check for leaks for several days following the installation. 1086530-2-A Kohler Co.
Need help?
Do you have a question about the K-3597 and is the answer not in the manual?
Questions and answers