Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for infobit iSwitch 265-Live
- Page 1 265-Live 1080P60 AV Streamer VER 1.0 www.infobitav.com info@infobitav.com...
-
Page 2: Table Of Contents
Thank you for purchasing this product For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. Surge protection device recommended This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shock, lighting strikes, etc. -
Page 3: Introduction
1. Introduction This AV Streamer based on H.265/H.264 compression technology distributes 1080P60Hz HDMI signals over a 100M/1G Network. It offers 1080P60Hz H265 + 540P@30 H264 + 1280*720@5 JPEG three streams, and supports bitrate configurable, compression video and resolution up to 1920x1200@ 60Hz 4:4:4. -
Page 4: Package Contents
3. Package Contents ① 1 x 1080P60 AV Streamer ② 3 x 3pin-3.81mm Phoenix Connector (male) ③ 1 x 12V/1A Locking Power Adapter ④ 2 x Mounting Ear ⑤ 4 x Machine Screw (KM3*4) ⑥ 1 x User Manual 4. Specifications Technical HDMI Compliance HDMI 1.3... - Page 5 IEC 61000-4-2: ESD Protection ± 15kV (Air-gap discharge) & ± 8kV (Contact discharge) Connection 1x IN [HDMI Type A, 19-pin female] Input ports 1x AUDIO IN [3pin-3.81mm phoenix connector] 1x OUT [HDMI Type A, 19-pin female] Output ports 1x AUDIO OUT [3pin-3.81mm phoenix connector] 1x LAN(PoE) [RJ45 jack, support PoE 802.3af power supply] Control ports 1x RS-232 [3pin-3.81mm phoenix connector]...
-
Page 6: Operation Controls And Functions
5. Operation Controls and Functions 5.1 Front Panel Name Function Description POWER LED The POWER LED is steady on when the unit is powered on, and off when the unit is powered off. (Red) 1G network connection indicator light. ▪ Light off: The network is not linked. ▪... -
Page 7: Rear Panel
5.2 Rear Panel Name Function Description DC 12V/1A power input port. The device can be powered via two methods: DC 12V ▪ Local DC 12V/1A power supply (with a high priority) ▪ PoE from Network Switch. Device acts as PD mode. 1G network port, supporting PoE 802.3af power supply. -
Page 8: Rack Mounting Instruction
6. Rack Mounting Instruction 6.1 6U V2 Rack Mounting This product can be mounted in a standard 6U V2 rack (Please contact your supplier for 6U V2 rack sale). The mounting steps are as follows: Step 1: Use included screws to fix two mounting ears on the machine, as shown in the figure below: Step 2: Insert the machines with mounting ears into a 6U V2 rack (up to 10 units can be installed vertically), as shown in the figure below:... -
Page 9: V2 Rack Mounting
6.2 1U V2 Rack Mounting This product also can be mounted in a standard 1U V2 rack. It is advised to install 2 units horizontally. The mounting steps are as follows: Step 1: Use included screws to fix two 1U V2 rack panels on the machine, as shown in the figure below: Step 2: Fix two rack panels on another machine in the same way, then fasten screws between two 1U V2 rack panels, so that two machines are mounted... -
Page 10: Stream Service Introduction
7. Stream Service Introduction 7.1 Platform Building This AV Streamer can provide RTSP/RTMP/RTMPS stream service through the network. Please follow the steps below to build the platform. Step 1: Connect the AV Streamer with signal source devices, TV, audio input and output devices. -
Page 11: Web Gui Operation
Ethernet Properties Ethernet Status Internet Protocol Version 4 (TCP/IPv4) Properties Step 4: Open the Google Chrome PC browser, enter the current IP address (192.168.54.104) of the AV Streamer in the address bar, and tap the Enter button to access the Web GUI. 7.2 Web GUI Operation Before enter the built-in Web GUI of the AV Streamer, there will be a login page, as shown in the figure below. -
Page 12: Status
7.2.1 Status ⑧ ① ④ ③ ② ⑦ ⑤ ⑥ ① Input Status: The status and information of the input signal. The green dot indicates that there is signal input, the format of the input audio and video is 720P60 dual-channel stereo. If the dot is red and shows “No Signal”, it means there is no signal input. -
Page 13: Encoder
Splashscreen Active: This item indicates whether the main stream Splash- screen is displayed or not. The green dot indicates that Splashscreen is displayed, the red dot indicates that the Splashscreen is not displayed. ⑥ Stream control buttons (please refer to point ⑤ for status display) Main Stream: Main stream control buttons, press the ACTIVE button to enable the main stream;... - Page 14 ① Main Encoding Setting Encoding Type: The encoding type, including H264 and H265. It is unique to the main stream. Encoding Resolution: The encoding resolution, including Same as input, 1920x1080, 1280x720, 640x480. Among them, Same as input, 1920x1080 and 1280x720 are unique to the main stream. Same as input means the encoding resolution is the same as the input resolution.
- Page 15 ⑤ RTSP Unicast Stream Setting RTSP Unicast Stream: Click the drop-down menu items to enable/disable the RTSP unicast stream. Main Stream RTSP Unicast URL: The main stream RTSP unicast address. After the RTSP unicast stream is enabled, you can click “Copy” to copy the main stream RTSP unicast URL, then paste it into the media player for playback.
- Page 16 ⑦ TS Multicast Stream Setting TS Multicast Stream: Click the drop-down menu items to enable/disable the TS multicast stream. TS Multicast Port: The TS multicast stream port number. After setting, it takes effect for both the main stream and the second stream. Main Stream TS Multicast URL: The main stream TS multicast address.
-
Page 17: Network
Audio Only Multicast URL: The audio only multicast address. After the audio only multicast stream is enabled, you can play audio only multicast stream on computer through the corresponding software such as VLC media player. ⑨ RTMP/RTMPS Push Stream Setting Main RTMP/RTMPS Stream: Click the drop-down menu items to enable/ disable the main RTMP/RTMPS stream. -
Page 18: System
① LAN Setting Select to set the IP Mode (DHCP/Static). When Static is selected, you can manually set the IP address, Subnet Mask and Gateway, then click “Apply” to take effect. When DHCP is selected, the IP attributes will be assigned by the router or other DHCP server automatically. - Page 19 ④ Splashscreen Splash Screen Active: The dot indicates the image upload status. The grey dot indicates that the image displayed by Splashsreen has not been uploaded, the green dot indicates that the image displayed by Splashsreen has been uploaded. Splash Screen Update: Click “Select File” to select the picture file to be uploaded, then click “Update”...
-
Page 20: Device List
7.2.5 Device List This page displays information about all devices that can be searched for on the network. IP Address: The IP address of the device. Location: This item indicates whether the device is local or not. Channel Number: The device channel number. If the channel number is in conflict between two devices, both of them will be displayed in red. -
Page 21: Rtsp/Ts Stream Operation
7.3 RTSP/TS Stream Operation This AV Streamer supports playing RTSP/TS stream on computer through the corresponding software such as VLC media player, simultaneously you can access the build-in Web GUI to configure the stream. The operation steps show as below. Step 1: Enable the RTSP/TS stream on the Encoder page of the Web GUI, as shown in the figure below. - Page 22 After clicking the “Open Network Stream” option, the Open Media window will pop up. Paste the RTSP/TS stream URL into the URL input box, then click the “Play” button to start playing stream. 20 / 28...
- Page 23 On VLC media player, you can view the TS/RTSP stream settings that are configured on the “Encoder Page” (for details, please refer to “7.2 Web GUI Operation). Choose “Tools > Codec Information” to display the stream information in the pop-up window as shown below. 21 / 28...
- Page 24 Choose “Tools>Codec Information>Statistics” to check the current bitrate. Please see the following picture. Note: The bitrate is floating up and down when you check it. This is a normal phenomenon. 22 / 28...
-
Page 25: Rtmp/Rtmps Push Stream (Youtube) Operation
7.4 RTMP/RTMPS Push Stream (Youtube) Operation This AV Streamer supports RTMP/RTMPS push stream on computer through the corresponding website such as Youtube, simultaneously you can access the build-in Web GUI to configure the push stream. The operation steps show as below. Step 1: Login to https://www.youtube.com/ and click on the create icon to start uploading. - Page 26 Click the icon to obtain the URL of the RTMPS push stream, according to the following information, the RTMPS push stream URL is rtmps://a.rtmps.youtube.com/live2/589x-m3g8-cw98-hrcp-a34k Live stream key Select the live stream key (RTMP (variable) ) Live stream key (pasted into editor) Copy Reset Live stream URL...
-
Page 27: Audio Only Stream Operation
7.5 Audio Only Stream Operation This AV Streamer supports playing audio only multicast stream on computer through the corresponding software such as VLC media player, and you can simultaneously access the build-in Web GUI to configure the stream. The operation steps show as below. Step 1: Enable the Audio Only Multicast Stream on the Encoder page of the Web GUI, as shown in the figure below. - Page 28 Step 3: Input the command “STMR GETSDP!” and click “Send”, then you will get the feedback, as shown in the figure below. Step 4: Copy the obtained configuration file (selected part in the figure above), then paste it in the new-created notepad (or directly overwrite the content of the provided RTP_AUDIO-STREAM-PCM.sdp file).
- Page 29 Step 5: Open the VLC media player on PC, click “Media > Open File” to import the sdp file, then the audio only multicast stream will start to play. 27 / 28...
-
Page 30: Application Example
8. Application Example HDMI Speakers Amplifier AUDIO 1G Network Switch AV Streamer RTMP / RTMPS RTSP RTSP RTSP / RTMP / RTMPS Microphone Router TV App PC VLC RTMP /RTMPS Router Phone Social Media Server The terms HDMI and HDMI High-Definition Multimedia interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
Need help?
Do you have a question about the iSwitch 265-Live and is the answer not in the manual?
Questions and answers