Page 2
Using cabinets or stands recommended by the • ● Panasonic accepts no responsibility for the loss, etc., manufacturer of the TV. of data caused by disasters. Only using furniture that can safely support the ●...
Using Media Player ······························ · 20 ● Do not use an unapproved pedestal / mounting equipment. Be sure to ask your local Panasonic dealer Additional Information ··························· 21 to perform the setup or installation of approved wall- hanging brackets.
Page 4
® physically damaged. If this occurs, contact your caused by radio wave interference, keep the TV away nearest Panasonic dealer immediately. from the devices such as other wireless LAN devices, ● During setup, make sure that all screws are securely other Bluetooth devices, microwaves, mobile phones tightened.
■ Preparation Battery for the Remote Control Caution ● Incorrect installation may cause battery leakage, corrosion and explosion. ● Replace only with the same or equivalent type. ● Do not mix old and new batteries. ● Do not mix different battery types (such as alkaline and manganese batteries).
Connecting the TV Wall mounting the TV (optional) ● Please ensure the TV is disconnected from the Please contact your local Panasonic dealer to purchase mains socket/ power point before attaching or recommended wall-hanging bracket. disconnecting any RF/ AV leads.
Page 7
Aerial RF cable Ω Using AV terminals Equipment MiNi AV Cable(not supplied) a b c d 3.5 mm a:L b:R c:GND :Video Use HDMI 1 to connect to an extension with ARC(Audio return channel) capability the sound. Enjoy the sound of external devices in multichannel sound (e.g.
Initial Setup Step 3: (Only for some countries) Select whether or not When you first turn on the TV, a series of steps will pop- to use and Google device to setup the TV. up to guide you to setup your TV. ●...
Page 9
Step 5: Read to accept the Google terms of service and Select "Scan" in order to scan. Before the scan starts, you will be asked to check if your antenna cable is plugged privacy policy. properly into the antenna socket on your TV. You can also skip this step by selecting "Skip"...
Page 10
Step 4: Set up with the Google Home app Step 7: Read to accept the Google terms of service and You can try setting up the TV with your phone. privacy policy. Your account Your account First, turn on your phone's Bluetooth (Note: Please make sure your phone has the Google Home App installed).
Page 11
Step 11: Environment Step 14: Please check settings environment , then press Press to select your ▲/▼ When all setup is done, the [Please check settings] enter next step. interface displays on the screen, and press OK to finish Home Mode: The home mode is optimized for efficient the initial setup.
Operating the TV Using the remote control Remote Control Functions Most of your television's functions are available via the menus that appear on the screen. The remote control supplied with your set can be used to navigate through the menus and to configure all the general settings.
Page 13
To show the text TEXT (This button is not used for this model) To show the subtitles STTL Channel up / down Select the digital key number To enter the media player MEDIA PLAYER Audio description (This button is not used for this model) How to Pair Remote Control with the TV This is a Bluetooth remote control, and before using it, please pair it with the TV firstly.
Page 14
Using the TV controls 32/40-inch model Indicators on the TV Power On /Power Off The TV is off, short press the button to turn on the power. The TV is on, short press the button, the virtual button will display as shown below. When the virtual button appears, press the button briefly to switch the button key functions.
General Operation Using Homepage The main screen is the centre of your TV. Press the Home button on your remote to display the main screen. From the main screen you can start any application, switch to a TV channel, watch a movie or switch to a connected device, or manage the settings.
Using the Menu Functions Parental controls: You can lock a specific channel code. A message is displayed when you select a locked Using Quick Access Menu channel.Please enter your password to view it. When selecting On, enter the 4-digit password. Note: Some of the functions might be unavailable *The first time you enter LiveTV after completing the in certain sources.
Page 17
Set up Google TV Channels & Inputs If you selected "Set up basic TV" during setup, you can Note: This function is only available in TV mode. log in to your Google account here. Depending on the signal source, the menu that There are two ways to enter.
Page 18
(5)Secondary Preferred Language: Press OK and then use Advanced Settings: ▲/▼ to select Sencond Preferred Language. - Dialogue Enhancer: To select on or off. - Dialogue Enhancer Level: To select the level of 1-7. LCN:ON and OFF - Balance: To select the level of -15 -15. - EPG: Press to enter the Program Guide menu.
Page 19
Date & Time: To select Automatic date &time , Set 1. Press to select the desired item. ▲/▼ date, Set time, Set time zone and Use 24-hour format. 2. Press OK to open the corresponding sub-menu. Note:Set date and set time are available when 3.
Document Video Photo Music Disk Media Player allows you to enjoy photo, music or video recorded on a USB Flash Memory. The picture may not appear correctly on this TV depending on the digital cameras used. Display may take some time when there are many files and folders in the USB Flash Memory.
● Electrical interference, static electricity, or erroneous Auto power standby function operation may damage the data or device. Panasonic is not liable for any deterioration or damage of data or The TV will automatically go into Standby mode in the device during operations with the TV.
Page 22
8,000 files and folders, however, some files and folders might not be accessible. Certain files, depending on how they are encoded, may not play on the TV. Certain files are not supported on all models. DivX and DTS codecs are not supported by the Panasonic.
Situate the TV away from sunshine or block sources If the problem still persists, please contact your local of bright light from shining on the remote control Panasonic dealer for assistance. signal receiver of the TV. Screen Parts of the TV become hot.
Specifications Model no. Weight 32-inch model 32-inch model TN-32S60AGH 3.7 kg (With Pedestal) 40-inch model 3.6 kg (TV only) TN-40S60AGH 40-inch model 5.9 kg (With Pedestal) Power source 5.8 kg (TV only) AC 220 - 240 V, 50 / 60 Hz...
Page 25
0 °C - 45 °C Humidity 20 % - 80 % RH (non-condensing) Note Design and Specifications are subject to change without notice. Mass and Dimensions shown are approximate. TN-32S60AGH and TN-40S60AGH comply with China Terrestrial Television National Standard (GB20600-2006) Mode-C=3780...
Page 26
【Settings > System > Device Preferences > Settings > OSS License】 At least three (3) years from delivery of this product, Panasonic will give to any third party who contacts us at the contact information provided below, for a charge no more than our cost of physically performing source code distribution, a complete machine-readable copy of the corresponding source code covered under GPL V2.0, LGPL V2.1 or the other...
Page 28
Laboratories Licensing Corporation. The Bluetooth word mark and logos are registered trademarks owned by ® the Bluetooth SIG, Inc. and any use of such marks by Panasonic Holdings Corporation is under license. Information on Disposal in other Countries Customer’s Record...
Need help?
Do you have a question about the TN-32S60AGH and is the answer not in the manual?
Questions and answers