Fitting The Wheels - DeLonghi EW0715W Instructions For Use Manual

FITTING THE WHEELS

Remove the feet and the wheels from the polystyrene packing. Turn the radiator upside-
down on a rug or a soft surface in order to prevent damaging the paint finish.
- Fit the wheels to the spindles on the feet and push firmly until they click into position.
Pull each wheel to check that it is correctly inserted.
- The feet with the casters must be fitted with two arc-shaped brackets and fit them
using the threaded bar and wing nut provided, only between the 1st and 2nd ele-
ment and the second to last (see fig. 1 to 3 inclusive).
fig. 2
MODELS WITH "EASY WHEEL"SYSTEM
Turn the radiator upside-down on a rug or a soft surface in order to prevent damaging
the paint finish. Fully unfold the castors by turning them outwards (Fig. 4).
Turn the radiator back to its upright position.
CAUTION
Always operate the heater in upright position only (wheels on the bottom, controls on
top). Any other position could create hazardous situation!
ON/OFF Switches
800
WATTS
BOTH 1500 WATTS
With pilot lights ON, the heater is ON!
HOW TO USE YOUR HEATER
WATTS ECONOMIZER
For more economical use, the Min. or Med. Watt
Pilot lights
switches may be used individually, after unit has
reached the operating temperature.
700
WATTS
fig. 1
fig. 4
fig. 3
3