All rights reserved Jupiter Avionics Corporation (JAC) permits a single copy of this manual to be printed or downloaded for the express use of an installing agency. Any such electronic or printed copy of this manual must contain the complete text of this copyright notice.
JLD-001 Panel Mounted Light Dimmer SECTION 1 - DESCRIPTION System Overview The JLD-001 Panel Mounted Light Dimmer provides an adjustable output voltage from +2.5Vdc to +28Vdc with a maximum current of 2.0A. The JLD-001 can be mounted in any orientation.
2 x 4-40 countersunk fasteners Bonding ≤ 2.5 mΩ Installation kit part number INST-JLD 1.4.3 Flammability of Materials The JLD-001 complies with the requirements of RTCA/DO-160G Sec 26.3.3 "Flammability", through equivalent flammability testing of materials and the Small Parts Exemption. Rev A Page 2...
Introduction This section contains unpacking and inspection procedures, installation information, and post-installation checks. Continued Airworthiness Maintenance of the JLD-001 is on condition only. Scheduled inspection and/or periodic maintenance of this unit are not required. Unpacking and Inspecting Equipment Unpack the equipment carefully. Check for shipping damage and report any problems to the relevant carrier. Confirm that the Authorized Release Certificate or Certificate of Conformance is included.
Unless otherwise noted, all wiring shall be a minimum of 20 AWG. Refer to the Interconnect drawing for additional specifications. 2.4.3 Mechanical Installation The JLD-001 can be mounted in any attitude and location with adequate space for the front panel and sufficient clearance for the connector and wiring harness. It requires no direct cooling. 2.4.4 Post Installation Checks 2.4.4.1...
This section contains the operating instructions for the JLD-001. Front Panel Control The JLD-001 is a panel mounted unit that allows the user to adjust the light dimmer output voltage and thus the aircraft instrument lighting. Rotating the control clockwise (cw) will increase the lighting voltage, and counter clockwise (ccw) will reduce it.
JLD-001 Panel Mounted Light Dimmer Installation and Operating Manual Appendix A - Installation Drawings Introduction The drawings necessary for installation and troubleshooting of the JLD-001 Panel Mounted Light Dimmer are in this Appendix, as listed below. Installation Drawings DOCUMENT JLD-001 Connector Map...
[aircraft location]. See Section 1 of the JLD-001 Installation and Operating Manual. Installed in accordance with the JLD-001 Installation and Operating Manual, Revision [ ], and AC 43.13-2, Chapters 2, and 3. The JLD-001 interfaces with existing aircraft systems per the Installation and Operating Manual instructions.
Page 16
Refer to the JLD-001 Maintenance Manual. 7. Removal and Replacement Information Refer to Section 2 of this manual - the JLD-001 Installation and Operating Manual. If the unit is removed and reinstalled, a functional check of the equipment should be conducted.
Need help?
Do you have a question about the JLD-001 and is the answer not in the manual?
Questions and answers