Advertisement
Quick Links
Advertisement
Summary of Contents for GN TV-Streamer+
- Page 1 Quick guide TV-Streamer+...
-
Page 2: Tv-Streamer
TV-Streamer+ Contents: TV-Streamer+ Digital (optical) audio cable (remove cable plug covers before use) USB-A to USB-C cable (used to supply power from the TV to the TV-Streamer+) Analog audio cable Hook and loop fastening tape strip... - Page 3 Descriptions: A. Increase volume/delay adjustment B. LED indicator: audio streaming/ pairing indicator C. Decrease volume/delay adjustment D. Pairing/delay mode button adjustment E. Audio input: analog or digital (optical) F. Power connection: USB-C G. LED indicator: power...
- Page 4 How to set up the TV-Streamer+ Before you start: Check your hearing aids are paired with the TV-Streamer+. If not, go to the section “How to pair hearing aids to TV-Streamer+”. 1. Two cables in the box: A digital optical mini-TOSLINK connector (image 1) and an analog stereo 3.5 mm mini-jack to L/R RCA cable (image 2), each with 3.5 mm plug (image 3) on the other end.
- Page 5 How to pair hearing aids to TV-Streamer+: 1. Place hearing aid(s) within two inches (five cm) of the TV-Streamer+. <2 in (5 cm) 2. Press pairing button on the back of the TV-Streamer+.
- Page 6 3. The green LED on the front will flash in short intervals while searching for a hearing aid. 4. Flashing will continue for 6. Flashing will continue for up to 12 seconds for the first another 15 seconds as the hearing aid, followed by a solid TV-Streamer+ searches for green indicator for three...
- Page 7 Your hearing care professional can be reached at: Manufacturer according to FDA: Manufacturer according to EU Medical Device Regulation GN Hearing 2017/745: 8001 E Bloomington Freeway Bloomington, MN 55420 GN Hearing A/S Lautrupbjerg 7 DK-2750 Ballerup Denmark 402634011 revA 2023.09 402634011...
Need help?
Do you have a question about the TV-Streamer+ and is the answer not in the manual?
Questions and answers