Playlearn BWWMBTN Instructions For Installation

Product Introduction: Bubble Wall with Color Change Buttons
The Bubble Wall with Color Change Buttons is a captivating and therapeutic sensory product designed to enhance visual and tactile stimulation.
Measuring 600x105x1100 mm, this innovative bubble wall features vibrant LED lights and dynamic bubbles, creating a mesmerizing display.
Equipped with four color-coded buttons (red, green, blue, white) and a cube controller, users can interact with the bubbles and lights, changing
the patterns to match the colors for a fun and educational experience.
The Bubble Wall with Color Change Buttons promotes sensory integration and color recognition through engaging play, making it ideal for sensory
rooms, therapy centers, educational facilities, and home use. Easy to maintain, the product includes a manual water management system and
algaecide to keep the water clean. Enhance your sensory environment with this dynamic and versatile product. For support, please
contact support@playlearn.com
Specification:
Four buttons Controlled
Water tank Chamber x 4
Frame Color: Opal
Input Voltage: 12 VAC
Transformer: 12V 4.5 Amp
Maximal Power: 42Watts
LED light: DMX 5050-2812,
60 chips/meter
Solenoid Valve: 12v 6.5w x 4pcs
PCB control board x 1pc
Air pump: 12VAC 5.5w x1pc
Material: Acrylic
Program Override: Available
A. Preparation:
-Gather tools: electric drill, level, screwdriver, hammer, and a pen.
-Ensure the area is clear and ready for installation.
B. Install item to the wall:
1. Use the level to mark a
horizontal line on the wall at a
height of 105-110 cm from the
floor.
4. Drill holes at the marked
positions.
Instruction for installation and usage
Bubble Wall with Color Change Buttons
(Model Number: BWWMBTN)
HOW TO INSTALL THE PRODUCT
2. Align the top holes of the wall
brackets with the marked line and
mark all screw positions.
5. Insert the expansion screws
plastic base into the holes using a
hammer.
Page 1
Product Details
Dimensions: 600x105x1100 mm
Components:
Bubble wall panel - 1 pc
Transformer 12V 4Am - 1 pc
Hand pump for fill and
drain water - 1 set
Bracket - 1 pc
Expansion Screws - 14 pcs
Screw driver - 1 pc
Rubber Cap - 1 pc
Sensory toy
6. Align the brackets with the drilled holes.
Secure the brackets to the wall using
screws and a Phillips screwdriver.
3.Take the bracket and
align the top row of holes
with the centerline on the
wall
- Use a pen to mark
circles on the wall through
each hole in the bracket.