Samsung DV300 Service Manual
  1. Manuals
  2. Brands
  3. Samsung Manuals
  4. Digital Camera
  5. SMART CAMERA DV300
  6. Service manual
Samsung DV300 Service Manual

Samsung DV300 Service Manual

Hide thumbs Also See for DV300:
Table of Contents

Advertisement

Quick Links

Download this manual
DIGITAL CAMERA
DV300/DV300F/DV305/DV305F
SERVICE
Manual
DIGITAL CAMERA
CONTENTS
1. Repair information
2. Product specifications
3. Disassembly and reassembly
4. PCB diagrams
5. Block diagram
6. Firmware update
7. Adjustment
8. Exploded view and parts lis

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DV300 and is the answer not in the manual?

Questions and answers

Related Manuals for Samsung DV300

Summary of Contents for Samsung DV300

  • Page 1 DIGITAL CAMERA DV300/DV300F/DV305/DV305F SERVICE Manual DIGITAL CAMERA CONTENTS 1. Repair information 2. Product specifications 3. Disassembly and reassembly 4. PCB diagrams 5. Block diagram 6. Firmware update 7. Adjustment 8. Exploded view and parts lis...

  • Page 2: Table Of Contents

    Contents 1. Repair information 1-1 Customer satisfaction statement ..........1-1 1-2 Warranty and repair service information ........1-1 1-3 Precaution for disassembly and reassembly ....... 1-4 2. Product specifications 2-1 Specifications ................2-1 2-2 Product comparison ..............2-2 2-3 Accessories information ............2-3 2-4 About the memory card .............
  • Page 3 Contents 6. Firmware update 6-1 Product reset ................6-1 6-2 Version check ................6-3 6-3 Upgrade ................... 6-4 7. Adjustment 7-1 Basic guide for adjustment ............7-1 7-2 Lens shading ADJ ..............7-3 7-3 Shutter close time ADJ .............. 7-4 7-4 Flash ADJ .................

  • Page 4: Repair Information

    In the event that a valid date of purchase is not available, the warranty period will be determined by the date of manufacture. The warranty period shall be decreased to three months from the original product manufactured date. Copyright© 1995-2012 SAMSUNG. All rights reserved.

  • Page 5: Limited Warranty

    Our liability under this warranty shall be limited to the following: a. In the event of a same malfunction problem within two months after repair service by Samsung authorized technician, we will repair or replace free of charge the component of the product which is found to be defective.
  • Page 6 Defect occurring after the expiration of the Warranty Period. b. Damage due to negligence, immersion in water, impact, loss and tampering. c. Repair or alteration performed by any party other than Samsung authorized technicians. d. Misuse or other improper use of the power button.

  • Page 7: Precaution For Disassembly And Reassembly

    Use an anti-static mat as well as an anti-static wrist strap to avoid ESD damage to PCB. The use wooden or plastic tweezers is recommended for manual placement. CONNECTOR Metal tip tweezer might make marks or damage. BARREL Always follow proper direction while assembling the components of the barrel. Copyright© 1995-2012 SAMSUNG. All rights reserved.

  • Page 8: Product Specifications

    • Tele: 0.5–1.6 m (ISO Auto) ISO Range Auto, ISO 80, ISO 100, ISO 200, ISO 400, ISO 800, ISO 1600, ISO 3200 Samsung Lens f = 4.5–22.5 mm Focal Length (35 mm film equivalent: 25–125 mm) • Internal memory: Approx. 16 MB •...

  • Page 9: Product Comparison

    ISO Range ISO 1600, ISO 3200 ISO 1600, ISO 3200 Samsung Lens f = 4.5–22.5 mm Samsung Lens f = 4.7 mm-23.5 mm Focal Length (35 mm film equivalent: 25–125 mm) (35 mm film equivalent: 26 mm-130 mm) • Internal memory: Approx. 16 MB •...

  • Page 10: Accessories Information

    Battery AD43-00203A Packing items BLACK AD63-02604A Strap SILVER AD63-02596A User Manual CD-ROM AD46-00427A DV300_EUR1 AD68-06834A DV300_EUR2 AD68-06835A DV300_EUR3 AD68-06836A DV300_ASIA AD68-06837A Quick Start Guide DV300_S.CHI AD68-06833A DV300_CANADA AD68-06838A DV300_SEA AD68-06839A DV300_TUR AD68-06840A DV300_SEDA AD68-06876A Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 11 Product specifications <Table. 2-4 Optional items information> image Description Parts No. CC9S70B AD69-03285A CC9S71N AD69-03284A CC9S30B AD69-03283A Camera case AD69-02964A CC9U21B/P Optional items AD69-03010A CC9U11B AD69-02397B A/V cable AD39-00191A 1109-001446 Memory card 1109-001420 1109-001418 Copyright© 1995-2012 SAMSUNG. All rights reserved.

  • Page 12: About The Memory Card

    (DV300F/DV305F only) * The figures above are measured without using the zoom function. Available recording time may vary if you use the zoom. Several videos were recorded in succession to determine the total recording time. Copyright© 1995-2012 SAMSUNG. All rights reserved.

  • Page 13: About The Battery

    Approx. 80 min Record videos at resolution and 30 FPS. • The figures above are measured by Samsung’s standards. Your results may differ, depending on your actual usage. • Several videos were recorded in succession to determine the total recording time.

  • Page 14: Disassembly And Reassembly

    Disassembly and reassembly 3. Disassembly and reassembly 3-1 Screw parts list <Table. 3-1 Screw Information> PAGE NO. TYPE CODE SCREW(M1.4X4.0 MACHINE) 6001-002159 SCREW(M1.4X4.0 TAP) 6003-001739 3-10 SCREW TAPTYPE 6003-001369 Copyright© 1995-2012 SAMSUNG. All rights reserved.

  • Page 15: Disassembly Of Main Unit

    (a) Remove the two SCREWs on the left side. SCREW(M1.4X4.0 MACHINE) Fig. 3-1 (b) Remove the two SCREWs on the right side. SCREW(M1.4X4.0 MACHINE) Fig. 3-2 (c) Remove the one SCREW on the bottom side. SCREW(M1.4X4.0 MACHINE) Fig. 3-3 Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 16 Slightly wiggle the LOCKING PART to widen the gap. You'll have to apply a little force to remove it. FRONT COVER ASSY BACK COVER ASSY Fig. 3-4 (e) Remove the BACK COVER ASSY. BACK COVER ASSY Fig. 3-5 Copyright© 1995-2012 SAMSUNG. All rights reserved.

  • Page 17: Disassembly Of Lcd Assy

    3. Disassembly of LCD ASSY. (a) Remove the CONNECTOR as indicated " Fig. A" below and Then remove the LCD ASSY. LCD ASSY Remove the FPCB from the connector. FPCB FPCB Fig. A Fig 3-7 Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 18 Disassembly and reassembly 4. Disassembly of MAIN FRAME ASSY. (a) Remove the three SCREWs. SCREW(M1.4X4.0 TAP) Fig 3-8 (b) Remove the MAIN FRAME ASSY. MAIN FRAME ASSY Fig 3-9 Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 19 (b) Remove the two CONNECTORs as indicated " Fig. B" below. Remove the FPCB from the connector. FPCB Fig. A FPCB Fig. B Fig 3-10 (c) Remove the BARREL_MAIN PCB ASSY. BARREL_MAIN PCB ASSY Fig 3-11 Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 20 (d) Remove the TAPE(T/SHEET-KEY PCB) of part "a" and then two CONNECTORs as indicated " Fig. A" and removing it. ⓐ T/SHEET-KEY PCB Remove the FPCB from the connector. FPCB FPCB Fig. A Fig 3-12 (e) Remove the BARREL ASSY with MAIN PCB. MAIN PCB ASSY BARREL ASSY Fig 3-13 Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 21 Disassembly and reassembly 6. Disassembly of FRONT COVER ASSY. (a) Remove the FRONT COVER ASSY. FRONT COVER ASSY Fig 3-14 (b) Remove the SUB LCD. SUB LCD Fig 3-15 Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 22 Disassembly and reassembly 7. Disassembly of TOP COVER ASSY. (a) Remove the two LOCKs of TOP COVER ASSY. BOTTOM Fig 3-16 (b) Remove the TOP COVER ASSY. TOP COVER ASSY Fig 3-17 Copyright© 1995-2012 SAMSUNG. All rights reserved.

  • Page 23: Disassembly Of Barrel

    It must be processed for discharge to the main condenser as shown in the below picture. Discharging Fig 3-18 3-3 Disassembly of barrel 1. Disassembly of PCB FPC-CCD ASSY. (a) Remove the three SCREWs from the PCB FPC-CCD ASSY. SCREW-TAPTYPE Fig 3-19 3-10 Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 24 Disassembly and reassembly (b) Remove the PCB FPC-CCD ASSY. PCB FPC-CCD ASSY Fig 3-20 2. Disassembly of BARREL FPCB. (a) Remove the five SCREWs. SCREW-TAPTYPE SCREW-TAPTYPE SCREW-TAPTYPE Fig 3-21 Copyright© 1995-2012 SAMSUNG. All rights reserved. 3-11 3-11...
  • Page 25 (c) Remove the FPCB from the CONNECTOR as indicated "Fig. A" below. (d) Remove the fixed part by slightly move the FPCB as shown in the "Fig.B". Remove the FPCB from the connector. FPCB FPCB Fig. A Fig. B Fig 3-23 3-12 Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 26 Make the BARREL by state of WIDE as illustrated and then remove the FPCB. Be damage the FPCB If state to CLOSE of BARREL when remove the FPCB. WIDE ⓐ Fig 3-25 Copyright© 1995-2012 SAMSUNG. All rights reserved. 3-13 3-13...
  • Page 27 Disassembly and reassembly (c) Remove the BARREL BASE. BARREL BASE Fig 3-26 (d) Remove the BARREL-OUTER CAM. BARREL-OUTER CAM Fig 3-27 3-14 Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 28 (e) Remove the BARREL-OUTER GUIDE. BARREL-OUTER GUIDE Fig 3-28 (f) Remove the BARREL-INNER CAM/ ASSY SUB BARREL-ZOOMRING and ASSY SUB BARREL-2ND_OIS/ PLATE-INNER GUIDE. ASSY SUB BARREL-2ND_OIS/ PLATE- INNER GUIDE BARREL-INNER CAM/ ASSY SUB BARREL-ZOOMRING Fig 3-29 Copyright© 1995-2012 SAMSUNG. All rights reserved. 3-15 3-15...
  • Page 29 (g) Turn the ASSY SUB BARREL-ZOOMRING by clockwise direction as arrow and remove it. BARREL-INNER CAM Clockwise direction ASSY SUB BARREL-ZOOMRING Fig 3-30 (h) Remove the PLATE-INNER GUIDE. ASSY SUB BARREL-2ND_OIS PLATE-INNER GUIDE Fig 3-31 3-16 Copyright© 1995-2012 SAMSUNG. All rights reserved.

  • Page 30: Reassembly Of Barrel

    3) Apply a light coating of the Grease KG-513 and 2) Apply the Grease RX-410 to the related parts make sure not to get any on the AF lens and other fo BARRIER ASSY. components. Apply Grease Apply Grease Copyright© 1995-2012 SAMSUNG. All rights reserved. 3-17 3-17...
  • Page 31 ■ Apply the HANARL with a clean and good-quality brush, making sure the surface is clean. ■ HANARL is volatile product. Keep its container tightly covered. BARREL-BASE Inside surface thoroughly ASSY SUB BARREL-OUTER CAM Inside surface thoroughly Fig. 3-32 3-18 Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 32 Disassembly and reassembly ASSY SUB BARREL-ZOOMRING Apply the three Pin Around the outside friction surface BARREL-INNER CAM Inside and outside surface thoroughly Fig. 3-33 Copyright© 1995-2012 SAMSUNG. All rights reserved. 3-19 3-19...

  • Page 33: Reassembly Of Barrel

    (b) Assemble the ASSY SUB BARREL-2ND_OIS and PLATE-INNER GUIDE by aligning the part “a with b” as illustrated. (Does not matter the Three location ~ ③.) ① ⓐ ② ASSY SUB BARREL-2ND_OIS ① ③ PLATE-INNER GUIDE ② ⓑ ③ ① Fig 3-35 3-20 Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 34 (d) Converge the protrusion part to the middle as part "a" of "Fig.A" and then assemble the BARREL-OUTER GUIDE by aligning the part “b” as illustrated. ⓐ ⓑ Fig. A BARREL-OUTER GUIDE Fig 3-37 Copyright© 1995-2012 SAMSUNG. All rights reserved. 3-21 3-21...
  • Page 35 (e) Assemble the ASSY SUB BARREL-OUTER CAM by aligning the part “a" with "b” as illustrated. ⓐ ⓑ ASSY SUB BARREL-OUTER CAM Fig 3-38 (f) Assemble the BARREL BASE. BARREL BASE Fig 3-39 3-22 Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 36 (g) After Assemble the FPCB HOLDER as illustrated, slide it into the marked slot “a". ⓐ Fig. A Fig 3-40 (h) Assemble the ASSY LENS BASE-D5 by aligning the part “a" with "b” as illustrated. ASSY LENS BASE-D5 ⓐ ⓑ Fig 3-41 Copyright© 1995-2012 SAMSUNG. All rights reserved. 3-23 3-23...
  • Page 37 Disassembly and reassembly (i) Assemble the ASSY ZOOM-0523-D5 by aligning the part “a", "b", "c" as illustrated. ⓑ ⓐ ⓒ ASSY ZOOM-0523-D5 Fig 3-42 3-24 Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 38 Disassembly and reassembly 2. Reassembly of BARREL FPCB. (a) Tighten the oen SCREW. SCREW-TAPTYPE Fig 3-43 (b) Assemble the FPCB as "Fig. A". Assemble the FPCB of CONNECTOR. FPCB FPCB Fig. A Fig 3-44 Copyright© 1995-2012 SAMSUNG. All rights reserved. 3-25 3-25...
  • Page 39 (c) Tighten the five SCREWs. SCREW-TAPTYPE SCREW-TAPTYPE Fig 3-45 3. Reassembly of PCB FPC-CCD ASSY. (a) Assemble the PCB FPC-CCD ASSY and then tighten the three SCREWs. PCB FPC-CCD ASSY SCREW-TAPTYPE Fig 3-46 3-26 Copyright© 1995-2012 SAMSUNG. All rights reserved.

  • Page 40: Pcb Diagrams

    2200NF J201 2200NF C415 R210 C712 100NF C633 C631 C423 100NF 100OHM 100NF C711 2200NF 2200NF C407 0.01nF C625 C637 C714 2200NF 2200nF R705 10000nF/10% 1000MOHM R706 1000MOHM TP809 TP807 C405 C406 47nF_50V 1000NF Copyright© 1995-2012 SAMSUNG. All rights reserved.

  • Page 41: Top Pcb

    PCB diagrams 4-2 TOP PCB 4-3 CCD FPCB BOTTOM SPK_N SPK_P LED1 100OHM 1MOHM 22000NF Copyright© 1995-2012 SAMSUNG. All rights reserved.

  • Page 42: Block Diagram

    Block diagram 5. Block diagram Copyright© 1995-2012 SAMSUNG. All rights reserved.

  • Page 43: Firmware Update

    1. First turn on the power of the camera. Power ON Fig. 6-1 2. Press the WIDE button + DOWN button and then turn the POWER off. DOWN WIDE Power OFF WIDE button + DOWN button Fig. 6-2 Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 44 Firmware update 3. Turn the power of the camera on again to check whether it has been reset. Fig. 6-3 Copyright© 1995-2012 SAMSUNG. All rights reserved.

  • Page 45: Version Check

    SHUTTER button + DOWN button, and then turn the POWER on. DOWN SHUTTER Power ON SHUTTER button + DOWN button Fig. 6-4 4. Check the version of the firmware and then turn the power off. Fig. 6-5 Copyright© 1995-2012 SAMSUNG. All rights reserved.

  • Page 46: Upgrade

    2. Use the AC adaptor or fully charged batteries for the power. * You can proceed with the upgrade only when the battery level is full (Icon showing full up to 3rd level). 3. Turn on the power of the camera. Power ON Fig. 6-6 Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 47 Fig. 6-7 5. The progress of the firmware upgrade will be displayed on the LCD and the upgrade will proceed. Fig. 6-8 6. When the upgrade is completed, the camera will automatically be turned off. Copyright© 1995-2012 SAMSUNG. All rights reserved.

  • Page 48: Adjustment

    7. Adjustment 7-1 Basic guide for adjustment ■ After replacing an electronic part, you must make changes for each adjustment item in the DV300/DV300F/DV305/DV305F. ■ The following table shows the necessary adjustment item for replacing each part. ■ The camera must be fixed with a tripod and levelled condition must be maintained.
  • Page 49 Display adjusted value and whether Display adjusted value and whether it is OK (LCD) it is OK (LCD) Set process ID (EEPROM) Auto Power Off or continue with process Power Off or stand by Copyright© 1995-2012 SAMSUNG. All rights reserved.

  • Page 50: Lens Shading Adj

    On the memory card, open and check if a CSV file was generated from the adjustment.. <Restriction> If the capacity of CSV file is more than 30KB, clear all of the previous data and then, record Copyright© 1995-2012 SAMSUNG. All rights reserved.

  • Page 51: Shutter Close Time Adj

    On the memory card, open and check if a CSV file was generated from the adjustment. <Restriction> If the capacity of CSV file is more than 30KB, clear all of the previous data and then, record Copyright© 1995-2012 SAMSUNG. All rights reserved.

  • Page 52: Flash Adj

    On the memory card, open and check if a CSV file was generated from the adjustment. <Restriction> If the capacity of CSV file is more than 30KB, clear all of the previous data and then, record Copyright© 1995-2012 SAMSUNG. All rights reserved.

  • Page 53: Punt Adj

    - Maintain distance of less than 1cm between the end of the camera body tube to the lens surface of the Infinity Collimator. - The camera must be fixed while the adjustment is made. Infinity Collimator Camera Tripod Fig. 7-4 Copyright© 1995-2012 SAMSUNG. All rights reserved.
  • Page 54 For the adjustment in these environments, AF may not be accurate when shooting Tele or macro. 3. Turn on the power of the camera. 4. The adjustment will automatically start. <Adjustment result> On the memory card, open and check if a CSV file was generated from the adjustment. Copyright© 1995-2012 SAMSUNG. All rights reserved.

  • Page 55: Vertical Line Adj

    On the memory card, open and check if a CSV file was generated from the adjustment. <Restriction> If the capacity of CSV file is more than 30KB, clear all of the previous data and then, record Copyright© 1995-2012 SAMSUNG. All rights reserved.

  • Page 56: Ccd Defect Adj

    Put your camera, face up, on a steady surface such as a table or anything solid that won’t move. Don’t put your camera on a highly unstable surface. Also don’t put your camera down or hold it. The noise may significantly affect degrading the Gyro Sensor and Hall Sensor performance. Copyright© 1995-2012 SAMSUNG. All rights reserved.

  • Page 57: Serial Number Writing Process

    5) When the adjustment is completed, the camera will automatically be turned off. <Process result> When checking the version (Press SHUTTER button and DOWN button to turn on), S/N appears on the screen. S/N: 123456789123 Fig. 7-9 7-10 Copyright© 1995-2012 SAMSUNG. All rights reserved.

  • Page 58: Exploded View And Parts List

    Parts No. Description Q ty Available Remark AD92-01830A ASSY KEY PCB AD97-21901A ASSY FRAME MAIN AD97-21900A ASSY LCD 6001-002159 SCREW (M1.4x4.0 MACHINE) 6003-001739 SCREW (M1.4X4.0 TAP) AD92-01814A ASSY PCB MAIN-DV300F_DV305F AD92-01849A ASSY PCB MAIN-DV300 Copyrightⓒ 1995-2012 SAMSUNG. All rights reserved.

  • Page 59: Main Sub Assembly

    SHAFT COVER BATTERY 2-13 6107-001768 SPRING-TS (COVER BATT) 2-14 AD63-06879A SHEET CHAMBER 2-15 AD68-06857A LABEL BATTERY 2-16 AD42-00014A ASSY WIFI ANTENNA 2-17 AD63-06880A SHEET GASKET CHAMBER AD97-21917A ASSY COVER-BATTERY_BK BLACK 2-18 AD97-21917B ASSY COVER-BATTERY_SL SILVER Copyrightⓒ 1995-2012 SAMSUNG. All rights reserved.

  • Page 60: Middle Cover Assembly

    Exploded view and parts list 8-3 MIDDLE COVER ASSEMBLY 3-14 3-13 3-12 3-11 3-10 3-15 3-16 3-17 3-28 3-18 3-26 3-27 3-19 3-24 3-20 3-21 3-25 3-23 3-22 Copyrightⓒ 1995-2012 SAMSUNG. All rights reserved.
  • Page 61 ASSY COVER TOP SUB_BK_DV300F BLACK AD97-21896B ASSY COVER TOP SUB_SL_DV300F SILVER AD97-22314A ASSY COVER TOP SUB_BK_DV305F BLACK 3-28 AD97-22315A ASSY COVER TOP SUB_SL_DV305F SILVER AD97-22316A ASSY COVER TOP SUB_BK_DV300 BLACK AD97-22316B ASSY COVER TOP SUB_SL_DV300 SILVER Copyrightⓒ 1995-2012 SAMSUNG. All rights reserved.

  • Page 62: Front Cover Assembly

    AD68-07057A LABEL PRODUCT AD97-21916A ASSY F/C_SUB_BK_DV300F_305F BLACK AD97-21916B ASSY F/C_SUB_BL_DV300F_305F BLUE AD97-21916C ASSY F/C_SUB_RED_DV300F_305F AD97-22383A ASSY F/C_SUB_PP_DV300F_305F PLUM 4-13 AD97-22326A ASSY F/C_SUB_BK_DV300 BLACK AD97-22326B ASSY F/C_SUB_BL_DV300 BLUE AD97-22326C ASSY F/C_SUB_RED_DV300 AD97-22375A ASSY F/C_SUB_PP_DV300 PLUM Copyrightⓒ 1995-2012 SAMSUNG. All rights reserved.

  • Page 63: Back Cover Assebly

    BUTTON OK BL BLUE AD64-03608V BUTTON OK RD AD64-03608W BUTTON OK PP PLUM AD61-05575A HOLDER STRAP AD97-21895A ASSY COVER BACK_BK BLACK AD97-21895B ASSY COVER BACK_BL BLUE AD97-21895C ASSY COVER BACK_RD AD97-21895D ASSY COVER BACK_PP PLUM Copyrightⓒ 1995-2012 SAMSUNG. All rights reserved.

  • Page 64: Barrel Assembly

    6-19 6-34 6-11 6-33 6-10 6-42 6-51 6-49 6-41 6-31 6-18 6-32 6-17 6-40 6-30 6-16 6-29 6-39 6-38 6-46 6-15 6-28 6-14 6-48 6-27 6-13 6-26 6-25 6-12 6-24 6-23 6-22 6-50 6-53 Copyrightⓒ 1995-2012 SAMSUNG. All rights reserved.
  • Page 65 LENS 6-26 AD67-02359A BARREL-2ND 6-27 AD63-06513A SHEET-G5 6-28 AD97-21682A ASSY SHUTTER-OIS 6-29 AD67-02340A LENS ASP LENS-G6 6-30 AD67-02360A BARREL-3RD 6-31 6107-003159 SPRING-ES 6-32 AD66-00984A SHAFT-AF GUIDE 6-33 AD61-05494A BASE-LENS 6-34 AD94-00250A ASSY SMD INSERT-OIS Copyrightⓒ 1995-2012 SAMSUNG. All rights reserved.
  • Page 66 AD97-21931A ASSY LENS BASE_OIS 6-50 AD97-21929A ASSY SUB BARREL-ZOOMRING AD97-21930A ASSY SUB BARREL-OUTERCAM_BK BLACK 6-51 AD97-22111A ASSY SUB BARREL-OUTERCAM_SL SILVER 6-52 AD92-01785A ASSY PCB FPC-CCD AD97-21935A ASSY BARREL_BK_OIS BLACK 6-53 AD97-22096A ASSY BARREL_SL_OIS SILVER Copyrightⓒ 1995-2012 SAMSUNG. All rights reserved.

  • Page 67: Packing Item

    Q ty Available Remark AD43-00203A BP88A_BATTERY AD39-00190A CB5MU05E_USB CABEL AD39-00191A AV_CABLE-MICRO USB AD44-00178A AD5055_KOR_AC ADAPTOR AD44-00184A AD5055_CHI AD44-00183A AD5055_EXP AD44-00179A AD5055_USA AD44-00182A AD5055_UK AD44-00185A AD5055_AUS AD44-00181A AD5055_ARG AD44-00180A AD5055_BRA AD63-02604A STRAP_KENOX_S860_BLACK AD63-02596A STRAP_KENOX_S730_SILVER 8-10 Copyrightⓒ 1995-2012 SAMSUNG. All rights reserved.
  • Page 68 E.Asia, W.Asia, China, Japan https://gspn2.samsungcsportal.com N.America, S.America https://gspn3.samsungcsportal.com © 2011 SAMSUNG Electronics Co.,Ltd This Service Manual is a property of Samsung Electronics Co.,Ltd. All rights reserved. Any unauthorized use of Manual can be punished under Printed in Korea applicable International and/or domestic law.

This manual is also suitable for:

Dv300fDv305Dv305f

Table of Contents