Summary of Contents for Aura AuraGate
- Page 1 AuraGate Installation Manual V1.0 - 2025 AuraGate V1.0 Installation Manual – 2025...
- Page 2 AuraGate V1.0 Installation Manual – 2025...
-
Page 3: Table Of Contents
2. Product Configuration Mode 3. Product Connection and Broadcast QR Code 1. Firmware Update 2. Settings 3. Broadcast Name and Password Creation 4. Parameter Settings 8. Signage 9. Technical data and LED display Warranty and technical support AuraGate V1.0 Installation Manual – 2025... -
Page 4: Introduction
Important information and intended use Read the following information carefully before using your AuraGate system. The AuraGate is a Bluetooth Low Energy audio streaming system operating in the 2.4 GHz frequency band from 2.402 GHz to 2.480 GHz. This product is designed for applications such as assistive listening, audio description, and language interpretation or translation. -
Page 5: Recycling Of Electronic Waste
If you have a medical implant or use a medical device, consult your physician or • the implant manufacturer before using the AuraGate. Avoid prolonged exposure to direct sunlight. • Do not store the product near heat sources such as radiators or stoves. - Page 6 This logo with the blue pictogram is intended for Spain, paper and cardboard packaging should be thrown into the blue bins for proper recycling. This logo means that the installation manual and packaging can be thrown into the recycling bins. AuraGate V1.0 Installation Manual – 2025...
-
Page 7: Installation
2. Make sure the mounting surface is clean, dry and capable of supporting the weight of the device (200 g). Step 2: Attaching the AuraGate 1. Installing the AuraGate on a wall, ceiling or partition: Mark the positions of the 3 Drill the 3 holes using a drill. - Page 8 AuraLoop to the right to mounting bracket. bracket attached to the fit it correctly. wall. 2. For tabletop installation: Simply place the AuraGate on a stable surface. Step 3: Connecting the Cables Connection diagram: AuraGate V1.0 Installation Manual – 2025...
-
Page 9: Dip Switch
Connect the 5V 500mA power supply and USB-USB-C cable to the USB-C slot. b. If you want to use POE power to simplify the installation of the terminal, use the optional Aura-POE accessory. This type of installation avoids connecting AuraGate to a power outlet. - Page 10 2. Connecting the audio source(s) Choose the type of input you want to connect audio to the AuraGate, below is a list of available inputs: LINE or MICRO 1 input : Terminal block type connector for a line or mic signal.
-
Page 11: Connecting To The Auraconnect App
Phantom power micro 2 disabled enabled Step 4: Getting Started 1. Once the cables are properly connected, power on the AuraGate. 2. Check that the indicator lights indicate normal operation (see troubleshooting section for details). 6. Connecting to the AuraConnect App Aura by Opus solution has been designed to simplify configuration as much as possible for the installer. - Page 12 AuraConnect allows you to easily configure and manage Aura by Opus products in just a few clicks. The application offers 2 levels of use: Installers • Owners. • It allows: To create sites (buildings, rooms, reception areas, etc.) and associate products •...
- Page 13 Step 2: Choosing the account type There are 2 roles in the AuraConnect application which will allow access to different services: AuraGate V1.0 Installation Manual – 2025...
- Page 14 Step 3 : Getting started with the application Once the account is created, you access the main interface of the application. AuraGate V1.0 Installation Manual – 2025...
- Page 15 It is important to organize your installation well by creating rooms or zones with clear words (Building A - Amphitheater A154) for a better understanding of the installation of several products in an area, this will allow you to find them more easily during maintenance. AuraGate V1.0 Installation Manual – 2025...
-
Page 16: Connecting Products To The Auraconnect App
"Update available" The latest adjustments made to the product • Once this step is completed, you will be able to connect to your product to perform updates or configurations. AuraGate V1.0 Installation Manual – 2025... -
Page 17: Product Configuration Mode
7.2: Product configuration mode First generation Aura by Opus products need to be placed in configuration mode in order to perform adjustments or updates on the product (this step should no longer be necessary in the near future). To place your product in Config mode: 1. - Page 18 1- I add my product to the AuraConnect application (To be done only on first use) 2- I put my device in configuration mode (fixed white LED) 3- I can start updating or adjusting my device (you must be within 10m of the device) AuraGate V1.0 Installation Manual – 2025...
-
Page 19: Product Connection And Broadcast Qr Code
7.3 Product Connection and Broadcast QR Code It is important to note that first generation Aura by Opus products are configured via the AuraConnect application connected via Bluetooth to the product, so it is necessary to be within 10m of your product to make adjustments or updates. -
Page 20: Settings
QR code. If you choose “Unencrypted” access will be free. If you choose “Encrypted”, you will then need to create a password. A code is automatically suggested to you but you can change it. AuraGate V1.0 Installation Manual – 2025... - Page 21 To share user login information, go back to the product page. There you will find your QR code automatically generated and ready to be used for device login. AuraGate V1.0 Installation Manual – 2025...
-
Page 22: Parameter Settings
Broadcast Settings 1 Broadcast sample rate 1 General / Audio Transmit power General / Audio Audio mode General / Audio LED Activation General / Audio Volume Input 1 General / Audio Volume Input 2 AuraGate V1.0 Installation Manual – 2025... - Page 23 I/O Setup Input 1 I/O Setup Input 2 Reminder: You can make all of these adjustments from the moment you are logged in to "Config Mode". View of the App setting screen Non Crypté Crypté AuraGate V1.0 Installation Manual – 2025...
-
Page 24: Signage
If the LED is white while the DIPSWITCH positions are not in configuration mode, this means that your AuraGate is not broadcasting. There is then a software or hardware problem, turn the product off and then on again. If the problem persists, contact Opus Technologies technical support at support@opus-technologies.fr... - Page 25 Product Technical Specifications: AuraGate V1.0 Installation Manual – 2025...
-
Page 26: Warranty And Technical Support
10. Warranty and technical support The AuraGate benefits from a 5-year manufacturer warranty corresponding to 3 years + a 2-year extension valid upon product registration. If you have any problems or questions regarding the installation and use of your AuraGate, you can contact our technical support: Email : support@opus-technologies.fr... - Page 27 Note : __________________________________________________________________________________ __________________________________________________________________________________ __________________________________________________________________________________ __________________________________________________________________________________ __________________________________________________________________________________ __________________________________________________________________________________ __________________________________________________________________________________ __________________________________________________________________________________ __________________________________________________________________________________ __________________________________________________________________________________ __________________________________________________________________________________ __________________________________________________________________________________ __________________________________________________________________________________ __________________________________________________________________________________ __________________________________________________________________________________ __________________________________________________________________________________ __________________________________________________________________________________ __________________________________________________________________________________ __________________________________________________________________________________ __________________________________________________________________________________ __________________________________________________________________________________ __________________________________________________________________________________ __________________________________________________________________________________ __________________________________________________________________________________ __________________________________________________________________________________ __________________________________________________________________________________ __________________________________________________________________________________ __________________________________________________________________________________ __________________________________________________________________________________ __________________________________________________________________________________ __________________________________________________________________________________ __________________________________________________________________________________ AuraGate V1.0 Installation Manual – 2025...
- Page 28 AuraGate V1.0 Installation Manual – 2025...
Need help?
Do you have a question about the AuraGate and is the answer not in the manual?
Questions and answers