Advertisement
Quick Links
1) Place 2 black side rails end to end, upside down, as shown.
2) Place nut plate inside side rails, as shown, with flat side
against the rail.
3) Place wheel assembly on outside of side rails, as shown.
4) Insert and hand-tighten a bolt through each of the 4 corners of
the wheel assembly and nut plate.
5) Repeat Steps 1—4 with all the remaining pieces until you form
a hexagon with the Cart frame.
bounti x JumpSport
Rebounder Storage Cart
Terms & Conditions
Installation Guide
Advertisement
Summary of Contents for JumpSport bounti x Rebounder Storage Cart
- Page 1 JumpSport Rebounder Storage Cart Terms & Conditions Installation Guide 1) Place 2 black side rails end to end, upside down, as shown. 2) Place nut plate inside side rails, as shown, with flat side against the rail. 3) Place wheel assembly on outside of side rails, as shown.
- Page 2 6) IMPORTANT: Two of the wheel components will have locks on them. These 2 wheels should be installed right next to each other. 7) Make sure the edges of the side rails align properly, as shown. Then use the wrench (or similar) to snugly tighten down all 4 bolts.
- Page 3 Wear and tear from improper handling, such as dropping or forceful impacts. • Use of the cart on uneven surfaces or with items other than JumpSport Rebounders. Warranty Claim Process To make a warranty claim, please contact our customer service within 30 days of noticing a defect.
- Page 4 • The Rebounder Storage Cart is designed solely for the purpose of storing and transporting JumpSport Rebounders. It is not intended for any other use. • The manufacturer is not responsible for any injury or damage caused by misuse of the product, including but not limited to overloading, improper stacking, or using the cart on uneven or unsuitable surfaces.
Need help?
Do you have a question about the bounti x Rebounder Storage Cart and is the answer not in the manual?
Questions and answers