Summary of Contents for DAV TECH E2K - 200
- Page 1 E2K – 200 AND E2K – 400 EXTRUSION SYSTEM COD.: DTVI_E2K-200400_2434 TRANSLATED FROM ORIGINAL REV.: 00 Read carefully before use! DATE: 22/08/2024...
-
Page 2: Table Of Contents
MAINTENANCE ..........................20 TROUBLESHOOTING ........................... 21 END OF LIFE ............................ 21 COD.: DTVI_E2K-200400_2434 DAV TECH SRL REV.: 00 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law. DATE: 22/08/2024... -
Page 3: General Information
If you have any doubts about the interpretation or reading of this document, please contact the manufacturer. DAV Tech declines any responsibility relating to improper use of the component. Observe the specifications in this manual. -
Page 4: Symbology
Qualified technician made available by the manufacturer to carry out operations of a complex nature in particular situations, or in any case as agreed with the customer. COD.: DTVI_E2K-200400_2434 DAV TECH SRL REV.: 00 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law. -
Page 5: Reference Standards
The reference standards and directives of this manual are the following: Directives • 2006/42/EC – Machinery Directive; COD.: DTVI_E2K-200400_2434 DAV TECH SRL REV.: 00 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law. DATE: 22/08/2024... -
Page 6: Declaration Of Incorporation (Annex Ii B Dir. 2006/42/Ec)
USE AND MAINTENANCE MANUAL 1.3 Declaration of incorporation (Annex II B DIR. 2006/42/EC) Manufacturer's name: DAV Tech Srl Address: Via G. Ravizza, 30, .36075, Montecchio Maggiore (VI) DECLARES THAT THE ALMOST MACHINE Component: E2K – 200; E2K – 400 Model:... -
Page 7: Glossary
Touch screen that allows the user to interact with a graphic interface using their Touch screen fingers or objects. COD.: DTVI_E2K-200400_2434 DAV TECH SRL REV.: 00 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law. -
Page 8: Service And Manufacturer Contact Details
(or the service center if present) directly, specifying the identification data of the component. The customer can make use of the technical and commercial support of local agents or importers, who are in direct contact with the company DAV Tech Srl. Company name... -
Page 9: Presentation And Operation
The fluid storage time has not been exceeded; • The fluid packages are tightly sealed. COD.: DTVI_E2K-200400_2434 DAV TECH SRL REV.: 00 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law. -
Page 10: Special Versions
Valve closure Valve opening Spacer spring Dosing nozzle support Closing body COD.: DTVI_E2K-200400_2434 DAV TECH SRL REV.: 00 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law. DATE: 22/08/2024... -
Page 11: Operation
BLACK Data CYAN Pneumatic line Notes Figure 02 – Connection Example COD.: DTVI_E2K-200400_2434 DAV TECH SRL REV.: 00 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law. DATE: 22/08/2024... -
Page 12: Exploded
2.1 Exploded The following is a list of the main valve components with spare part numbers. COD.: DTVI_E2K-200400_2434 DAV TECH SRL REV.: 00 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law. - Page 13 The characteristics of these components may vary according to the dosage ratio required by the application. In addition, they may vary depending on the extruder model used (E2K-200 and E2K-400) Ask the manufacturer's technicians for more information. COD.: DTVI_E2K-200400_2434 DAV TECH SRL REV.: 00 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law.
-
Page 14: Technical Data
You can request the 3D of the component in the desired version from the manufacturer without any obligation. COD.: DTVI_E2K-200400_2434 DAV TECH SRL REV.: 00 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law. -
Page 15: Safety
The component is manufactured in compliance with the technical safety standards in force at the time of its construction. COD.: DTVI_E2K-200400_2434 DAV TECH SRL REV.: 00 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law. -
Page 16: Machine Safety Devices
If the packaging is not intact, contact the manufacturer immediately, also sending photos of the condition of the packaging. Do not open it until you have notified the manufacturer. COD.: DTVI_E2K-200400_2434 DAV TECH SRL REV.: 00 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law. -
Page 17: Installation
In this chapter, we want to explain the connection method that must be used for the component. The following types of connection are provided: • Electrical connection; COD.: DTVI_E2K-200400_2434 DAV TECH SRL REV.: 00 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law. DATE: 22/08/2024... -
Page 18: Electric
2.2) must be connected to the appropriate connectors, which must be connected to the controller in the direction of connection. Here's an outline of what connector pins do: COD.: DTVI_E2K-200400_2434 DAV TECH SRL REV.: 00 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law. -
Page 19: Commissioning
• How to adjust the height of the mixer closure block and nozzle holder; COD.: DTVI_E2K-200400_2434 DAV TECH SRL REV.: 00 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law. -
Page 20: Cartridge Change
It is advisable to insert the screws in place first, and then screw them inside the appropriate pipes COD.: DTVI_E2K-200400_2434 DAV TECH SRL REV.: 00 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law. -
Page 21: Height Adjustments
By loosening those, you can raise or lower the mixer holder, to adapt it to your needs COD.: DTVI_E2K-200400_2434 DAV TECH SRL REV.: 00 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law. -
Page 22: Maintenance
ATTENTION! Only use soft brushes or cotton cloths to clean the dosing system. COD.: DTVI_E2K-200400_2434 DAV TECH SRL REV.: 00 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law. -
Page 23: Troubleshooting
We recommend that you commission specialist companies for this purpose and must always observe the applicable laws on waste disposal. COD.: DTVI_E2K-200400_2434 DAV TECH SRL REV.: 00 Any reproduction (total or partial) of this document not authorized by the manufacturer will be punished according to the law.
Need help?
Do you have a question about the E2K - 200 and is the answer not in the manual?
Questions and answers