Important safety instructions When using an electrical appliance, basic precaution should always READ ALL INSTRUCTIONS BEFORE USING (THIS APPLIANCE) The vacuum cleaner is an electric appliance. It must be used in accordance with the operating conditions of the instructions. The instructions should be kept properly for future reference.
Assembling & Disassembling 1. Attach the dust cup assembly with main frame as shown in figure 1. When hearing the sound of "click",the main engine is locked. 2. Press the dust cup unloading button, and disassemble the dust cup from the main frame as shown in figure 2.
Page 5
Using Full circle LED strip, changing with the dust Power sensor module Three gears percentage Auto mode Smart mode Dust full Gear change indicator button indicator button Switching on and off Press the on/off button on the switchboard and the vacuum cleaner will start working in automatic mode.
Page 6
Charging method 1. Before charging, please ensure that the power adapter is well connected to the AC power supply, the output of the adapter is inserted into the charging port of the hoover host, when charging the peripheral LDE light flashes green (running light), the digital tube battery mark flashes until fully charged 100%, the peripheral light stops flashing (constant state, the digital tube shows 100%).
Roller brush release button 1. Press the release button to 2. Clean the hair fur debris from the 3. Install the roller brush back in remove the roller brush roller brush place Troubleshooting Problem Solution Make sure cleaner is fully powered. Push charger securely into electrical outlet, try another outlet or Vacuum cleaner doesn't work check circuit breaker.
Need help?
Do you have a question about the VC-D11E1 and is the answer not in the manual?
Questions and answers