Table of Contents
Advertisement
Available languages
Available languages
Quick Links
Advertisement
Table of Contents
Summary of Contents for Onlogic MK022
- Page 1 MK022 Fanless Rackmount Adapter Product Manual...
-
Page 2: Table Of Contents
1.2 - Package Contents & Compatibility 1.3 - Product Specifications 1.4 - Exterior Features and Dimensions 1.4.1 - MK022 Chassis 1.4.2 - MK022 Mounting Brackets 2.0 - Installation Instructions 3 - Appendices 3.1 - Safe use and installation instructions 3.2 - Précautions et guide d’installation... -
Page 3: Product Overview
1.2 - Package Contents & Compatibility MK022 and the respective add-on system mounting kits include the hardware needed to install OnLogic systems into a standard 19 in server rack. Package contents are as noted in the table below: OnLogic MK022 Rackmount Adapter Base chassis kit for our Fanless Rackmount Adapter. -
Page 4: Product Specifications
Base Rackmounting Hardware kit including HX500 System Bracket Accessories included: 4x M5 Cage Nuts (Rackmount) MK022-BRKT-HX500-K 4x M5 Screws(Rackmount) 1x HX500 Mounting Bracket 4x M3, L = 6 mm Screws (For System mounting to Bracket) 2x M4 L = 6 mm Screws (For Mounting Bracket to Rackmount) -
Page 5: Exterior Features And Dimensions
MK022 System Mounting Brackets BRKT-MK022-HX300 / BRKT-MK022-HX401 / BRKT-MK022-HX500 / BRKT-MK022-HX511 / BRKT-MK022-ML100 / BRKT-MK022-ML350 Adapter Dimensions 285 mm x 208 mm x 6 mm Adapter Weight 0.30 kg / 0.7 lbs Regulatory Certifications RoHS 3 (2015/863/EU) 1.4 - Exterior Features and Dimensions... -
Page 6: Mk022 Mounting Brackets
1.4.2 - MK022 Mounting Brackets... -
Page 7: Installation Instructions
OnLogic system chassis. Secure the bracket to the system by using the 4x included M3x0.5 L = 6 mm screws from the mounting bracket kit. - Page 8 Step 4: Utilize the included 4x M5 Cage Nuts and 4x M5x0.8 L = 15 mm screws from the MK022 chassis kit to install the MK022 into a 19 in server. Follow enclosure/rack manufacturer instructions for mounting the MK022 securely into the rack to be used.
-
Page 9: Appendices
4. To protect against excessive RF exposure, maintain at least 20cm from any user and the RF antennas. Only use provided dual band antennas of 2dBi/2dBi gain. 5. Wall or ceiling mounting device requires use of OnLogic mounting plate or bracket. 6. Use M3x0.5mm Flat Head screws to attach mounting plate or mounting brackets to threaded holes on bottom or rear of chassis. -
Page 10: Précautions Et Guide D'installation
26. This equipment is not suitable for use in locations where children are likely to be present. WARNING: There is danger of explosion if the CMOS battery is replaced incorrectly. Disposal of battery into fire or a hot oven, or mechanically crushing or cutting of a battery can result in an explosion. - Page 11 16. Les méthodes de câblage utilisées pour le raccordement de l'équipement à l'alimentation secteur doivent être conformes au Code national de l'électricité, NFPA 70, et au Code canadien de l'électricité, Partie I, CSA C22.1. 17. Prévoyez suffisamment d'espace pour les connexions de câblage du bornier afin que les fils ne se plient pas et soient protégés contre les dommages accidentels.
Need help?
Do you have a question about the MK022 and is the answer not in the manual?
Questions and answers